Zebra S400 Windows 10 Driver
Zebra S400 Windows 10 Driver
I recently upgraded my operating system to Windows 10 and now I'm facing incompatibility issues with my Zebra S400 printer. I have been searching online for the appropriate driver but I haven't been successful in finding it. I have tried visiting the official Zebra website, but their support section only provides drivers up to Windows 8. I also tried various driver download websites, but most of them seem sketchy or require a paid subscription. Could someone please provide me with a reliable source or direct link to download the Windows 10 driver for the Zebra S400 printer? Any help would be greatly appreciated.
Re: Zebra S400 Windows 10 Driver
Below you can download zebra s400 windows 10 driver for Windows.
File name: zebra-s400_win10.exe
Version: 5.139
File size: 44352 MB
Upload source: original install disk
Antivirus software passed: Symantec ver. 3.63
Zebra S400 Windows 10 Driver
(click above to download)
The Zebra S400 is a device that requires the Windows 10 driver for optimal functionality. Here are the specifications of this device:
- Connectivity: USB, Serial, or Parallel port.
- Printing Technology: Direct Thermal and Thermal Transfer.
- Maximum Print Speed: 4 inches per second.
- Maximum Print Resolution: 203 dpi (8 dots/mm).
- Maximum Label Width: 4.25 inches.
- Maximum Label Length: 11 inches.
- Memory: 4MB Flash; 8MB SDRAM.
- Supported Barcodes: Code 39, Code 128, EAN-13, UPC-A, and more.
- Power Source: AC power adapter and optional battery pack.
- Dimensions: 7.3 inches (W) x 8.4 inches (H) x 10.7 inches (D).
- Weight: 7.7 lbs.
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra S400 not printing anything?
A: Ensure that the printer is properly connected to the computer and powered on. Check if there is sufficient label roll and correct paper alignment. Make sure the printer driver is correctly installed on your Windows 10 system. Check if there are any error messages displayed on the printer's control panel.
2. Q: Why is my Zebra S400 printing faded or blurry labels?
A: Verify that the label roll is loaded correctly and the ribbon, if using thermal transfer printing, is properly installed. Check if the printhead is clean and free from any debris or residue. Adjust the darkness setting in the printer driver software to enhance print quality. Confirm that you are using the appropriate label material and compatible ribbon.
3. Q: Why is my Zebra S400 showing a "Media Out" error?
A: Ensure that the label roll is loaded correctly and there is sufficient media remaining. Check if the label sensor is free from dust or obstruction. Make sure the media type and size settings in the printer driver match the actual label specifications. Verify that the label path is clear of any jams or blockages. If the issue persists, recalibrate the label sensor according to the printer's user manual instructions.
File name: zebra-s400_win10.exe
Version: 5.139
File size: 44352 MB
Upload source: original install disk
Antivirus software passed: Symantec ver. 3.63
Zebra S400 Windows 10 Driver
(click above to download)
The Zebra S400 is a device that requires the Windows 10 driver for optimal functionality. Here are the specifications of this device:
- Connectivity: USB, Serial, or Parallel port.
- Printing Technology: Direct Thermal and Thermal Transfer.
- Maximum Print Speed: 4 inches per second.
- Maximum Print Resolution: 203 dpi (8 dots/mm).
- Maximum Label Width: 4.25 inches.
- Maximum Label Length: 11 inches.
- Memory: 4MB Flash; 8MB SDRAM.
- Supported Barcodes: Code 39, Code 128, EAN-13, UPC-A, and more.
- Power Source: AC power adapter and optional battery pack.
- Dimensions: 7.3 inches (W) x 8.4 inches (H) x 10.7 inches (D).
- Weight: 7.7 lbs.
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra S400 not printing anything?
A: Ensure that the printer is properly connected to the computer and powered on. Check if there is sufficient label roll and correct paper alignment. Make sure the printer driver is correctly installed on your Windows 10 system. Check if there are any error messages displayed on the printer's control panel.
2. Q: Why is my Zebra S400 printing faded or blurry labels?
A: Verify that the label roll is loaded correctly and the ribbon, if using thermal transfer printing, is properly installed. Check if the printhead is clean and free from any debris or residue. Adjust the darkness setting in the printer driver software to enhance print quality. Confirm that you are using the appropriate label material and compatible ribbon.
3. Q: Why is my Zebra S400 showing a "Media Out" error?
A: Ensure that the label roll is loaded correctly and there is sufficient media remaining. Check if the label sensor is free from dust or obstruction. Make sure the media type and size settings in the printer driver match the actual label specifications. Verify that the label path is clear of any jams or blockages. If the issue persists, recalibrate the label sensor according to the printer's user manual instructions.
Re: Re: Zebra S400 Windows 10 Driver
Thanks for providing the link to the working Windows 10 driver for the Zebra S400 printer, it worked perfectly for my device!