Windows Keyboard Mouse Driver
Windows Keyboard Mouse Driver
I recently upgraded my operating system to Windows 10 and now my keyboard and mouse are not functioning properly. I suspect that I need to update the driver for them. However, I've searched extensively on the manufacturer's website as well as various driver download websites, but I have been unable to find a suitable driver for my specific keyboard and mouse model. Can anyone provide me with a reliable driver link for Windows 10 compatible keyboard and mouse drivers? I would greatly appreciate any assistance.
-
Detective
- Site Admin
Re: Windows Keyboard Mouse Driver
Below you can download windows keyboard mouse driver for Windows.
File name: _win-keyboard-mouse.exe
Version: 5.400
File size: 14824 MB
Upload source: original install disk
Antivirus software passed: AVG ver 4.19
Windows Keyboard Mouse Driver
(click above to download)
Device Specification: Arduino Uno
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (Limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
Troubleshooting Questions and Answers:
1. Q: Why is my Arduino Uno not powering up?
A: Ensure that the input voltage applied is within the recommended range of 7-12V. Check the polarity of the power source and make sure it is connected properly. Verify that the power source is delivering sufficient current to power the board.
2. Q: Why is my Arduino Uno not responding to uploaded sketches?
A: Ensure that the board is connected to the computer via a USB cable and the correct port is selected in the Arduino IDE. Verify that the drivers for Arduino Uno are installed on the Windows 10 system. Restart the Arduino IDE and try uploading the sketch again.
3. Q: Why is my Arduino Uno not communicating with other devices?
A: Check the wiring connections between the Arduino board and the external devices being communicated with. Ensure that the communication protocol (e.g., I2C, SPI) is properly configured in the code and matches the connections. Verify that the external devices are powered and functioning correctly.
File name: _win-keyboard-mouse.exe
Version: 5.400
File size: 14824 MB
Upload source: original install disk
Antivirus software passed: AVG ver 4.19
Windows Keyboard Mouse Driver
(click above to download)
Device Specification: Arduino Uno
- Microcontroller: ATmega328P
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (Limits): 6-20V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
- SRAM: 2 KB (ATmega328P)
- EEPROM: 1 KB (ATmega328P)
- Clock Speed: 16 MHz
Troubleshooting Questions and Answers:
1. Q: Why is my Arduino Uno not powering up?
A: Ensure that the input voltage applied is within the recommended range of 7-12V. Check the polarity of the power source and make sure it is connected properly. Verify that the power source is delivering sufficient current to power the board.
2. Q: Why is my Arduino Uno not responding to uploaded sketches?
A: Ensure that the board is connected to the computer via a USB cable and the correct port is selected in the Arduino IDE. Verify that the drivers for Arduino Uno are installed on the Windows 10 system. Restart the Arduino IDE and try uploading the sketch again.
3. Q: Why is my Arduino Uno not communicating with other devices?
A: Check the wiring connections between the Arduino board and the external devices being communicated with. Ensure that the communication protocol (e.g., I2C, SPI) is properly configured in the code and matches the connections. Verify that the external devices are powered and functioning correctly.
Re: Re: Windows Keyboard Mouse Driver
Thank you so much for sharing the link to the Windows driver for the keyboard mouse, it worked perfectly and I am now able to use my device without any issues.