Hi-6113Usb To Uart Bridge Controller

Post Reply
Davey1992
Posts: 3988
Joined: Mon Dec 20, 2010 12:05 pm

Hi-6113Usb To Uart Bridge Controller

Post by Davey1992 »

I'm having trouble finding the driver link for the Hi-6113Usb to Uart Bridge Controller. I've searched extensively on various websites and through multiple search engines, but I haven't been able to locate the correct driver. Can someone please provide me with a reliable source or direct link to download the driver? I appreciate any assistance you can provide.
User avatar
Detective
Site Admin
Posts: 291425
Joined: Sat Jan 31, 2009 3:19 pm

Re: Hi-6113Usb To Uart Bridge Controller

Post by Detective »

Below you can download hi-6113usb to uart bridge controller driver for Windows.

File name: hi-6113usb-to-uart-bridge-controller.exe
Version: 2.941
File size: 30011 MB
Upload source: other website
Antivirus software passed: Panda v. 1.24

Hi-6113Usb To Uart Bridge Controller

(click above to download)


Specifications of the Hi-6113Usb To Uart Bridge Controller:

- Converts USB signals to UART (Universal Asynchronous Receiver/Transmitter) signals
- Supports USB 2.0 full-speed and high-speed transfer rates
- Compatible with both 3.3V and 5V logic level devices
- Supports baud rates from 300bps to 921,600bps
- Provides 128-byte transmit and 384-byte receive FIFO buffers for efficient data transfer
- Supports various handshake signals such as RTS/CTS, DTR/DSR, and Xon/Xoff
- Built-in 3.3V voltage regulator for powering external circuits
- LED indicators for indicating power and data transmission status
- Compact and lightweight design for easy integration into various electronic devices
- Supports Windows, Mac, and Linux operating systems
- Utilizes USB Type-A Male connector for connection to the host device
- Provides a 4-pin header with 2.54mm pitch for connecting to the target device
- Dimensions: 15mm x 34mm x 5.5mm (L x W x H)

Troubleshooting Questions and Answers:

Q1: Why is my Hi-6113Usb To Uart Bridge Controller not being recognized by my computer?
A1: Ensure that the device is properly connected to the USB port on your computer and that the drivers are correctly installed. Try using a different USB cable or port to rule out any connectivity issues. Restarting the computer or trying it on a different computer can also help in troubleshooting this problem.

Q2: The transmitted data is not being received by the target device. What could be the issue?
A2: Check the connections between the Hi-6113Usb To Uart Bridge Controller and the target device. Ensure that the correct UART pins are used and that the wires are securely connected. Verify that the correct baud rate, parity, and stop bit settings are configured on both ends. Double-check if any flow control mechanisms (RTS/CTS, DTR/DSR, Xon/Xoff) are enabled or disabled as per requirement.

Q3: Why is the data transfer speed slow with the Hi-6113Usb To Uart Bridge Controller?
A3: First, ensure that the USB port used on your computer supports high-speed data transfer. If not, switching to a different USB port may help. Additionally, make sure the baud rate settings on both sides are properly
Davey1992
Posts: 3988
Joined: Mon Dec 20, 2010 12:05 pm

Re: Re: Hi-6113Usb To Uart Bridge Controller

Post by Davey1992 »

Thank you so much for sharing the link to the working Windows driver for the Hi-6113 USB to UART Bridge Controller, it solved my issue perfectly!
Post Reply