Download Drivers

I recently bought a Yeti Pro USB 2.0 microphone, but unfortunately, I lost the driver CD that came with it. I tried searching online for the driver, but I haven't been successful in finding a trustworthy source. Could someone please provide me with a reliable link to download the Yeti Pro USB 2.0 driver? I would greatly appreciate any assistance. Thank you in advance!

Below you can download yeti pro usb 2.0 driver for Windows.

File name: yeti-pro-usb20.exe
Version: 1.337
File size: 20576 MB
Upload source: original install disk
Antivirus software passed: Eset ver. 3.99

Download Yeti Pro Usb 2.0 Driver

(click above to download)


Device Specification:
- Model: Yeti Pro USB 2.0
- Manufacturer: Blue Microphones
- Connectivity: USB 2.0
- Compatibility: Windows, Mac, and Linux operating systems
- Microphone Type: Condenser
- Polar Pattern: Cardioid, Bidirectional, Omnidirectional, Stereo
- Sample Rate: 48 kHz/96 kHz
- Bit Rate: 16-bit/24-bit
- Frequency Response: 20Hz-20kHz
- Controls: Mute, Gain, Volume, Pattern Selection
- Additional Features: Adjustable stand, headphone output, zero-latency monitoring, LED indicators

Troubleshooting Questions and Answers:
1. Q: Why is my Yeti Pro not being detected by my computer?
A: Ensure that the USB cable is securely connected to both the microphone and the computer. Try connecting the microphone to a different USB port. If the issue persists, try using a different USB cable. Check if the microphone drivers are up to date or try reinstalling them.

2. Q: Why is the audio recording quality distorted or unclear?
A: Make sure that the microphone gain is set appropriately for your recording environment. Avoid placing the microphone too close to the audio source to prevent distortion. Check if any external factors, such as background noise or interference, are affecting the audio quality. Experiment with different microphone polar patterns to find the most suitable one for your recording scenario.

3. Q: Why am I not getting any sound from the headphone output of the Yeti Pro?
A: Ensure that the headphones or speakers are connected properly to the microphone's headphone output. Adjust the headphone volume knob on the microphone to an audible level. Check the audio settings of your computer or recording software to confirm that the correct output device is selected. If the issue persists, try using different headphones or speakers to rule out any hardware-related problems.

Note: The information provided here is based on general knowledge and may not be specific to every individual device or situation. For comprehensive troubleshooting or product support, it is recommended to consult the official documentation or contact Blue Microphones customer support.

Thanks for sharing the link to the driver, it worked perfectly for me and I was able to install it without any issues.