Download Drivers

I'm looking for a driver, please help

Below you can download qlogic fibre channel adapter driver for Windows.

File name: qlogic-fibre-channel-adapter.exe
Version: 9.109
File size: 17.18 MB
Upload source: manufactuter website
Antivirus software passed: Avira v. 4.57

Download Driver Qlogic Fibre Channel Adapter

(click above to download)


Device Specification:

- Device Name: Qlogic Fibre Channel Adapter
- Manufacturer: Qlogic Corporation
- Type: Fibre Channel Adapter
- Driver Type: Downloadable (needs to be installed)
- Supported OS: Windows, Linux, Unix
- Interface: PCI Express
- Supported Fibre Channel Protocols: FC-AL, FC-AL 2, FC-FG, FC-GS-2, FC-MI, FC-PH, FC-PH-2, FC-PH-3, FC-PI, FC-PLDA, FC-PLDA2, FC-VI, FC-SW
- Maximum Transfer Rate: 8 Gbps
- Connector Type: LC (Fiber Optic)
- Certification: T10 FC-PI-4, FC-FG-2

Troubleshooting Questions and Answers:

Q1: Why is my Qlogic Fibre Channel Adapter not functioning after driver installation?
A1: There could be a compatibility issue with the installed driver version. Ensure that you have downloaded the correct driver for your specific operating system. If the problem persists, try uninstalling the driver and reinstalling it using the latest version provided by the manufacturer.

Q2: Why am I experiencing slow data transfer rates with my Qlogic Fibre Channel Adapter?
A2: Slow data transfer rates can be a result of various factors. Check if the adapter is connected to a reliable and high-speed Fibre Channel network. Also, verify if the connected devices or storage systems support the same high transfer rates as the adapter. Additionally, updating the adapter firmware to the latest version might help improve performance.

Q3: Why is my Qlogic Fibre Channel Adapter not recognized by the operating system?
A3: Ensure that the adapter is securely inserted into the PCI Express slot. If it is connected properly but still not recognized, try using a different slot on your motherboard in case of a slot malfunction. Furthermore, check if the system BIOS is up to date and supports the particular adapter version. If all else fails, contact the Qlogic technical support for further assistance.

Thanks for sharing the link to the working windows driver for the Qlogic Fibre Channel Adapter, it was really helpful and saved me a lot of time searching for it.