Below you can download altera usb blaster windows 10 driver for Windows.
File name: altera-usb-blaster-win10.exe
Version: 9.674
File size: 45270 MB
Upload source: manufactuter website
Antivirus software passed: Kaspersky ver. 4.58
Altera Usb Blaster Driver Windows 10 Download(click above to download)
Device specification: The Altera USB Blaster is a programming cable designed for use with Altera FPGA development boards. It allows for programming and debugging of FPGA designs directly from a PC. The USB Blaster connects to the PC through a USB interface and to the FPGA development board via its JTAG connector.
Troubleshooting questions and answers:
1. Q: My Altera USB Blaster is not recognized by my Windows 10 PC. What should I do?
A: First, ensure that you have installed the latest version of the Altera USB Blaster driver for Windows 10. You can download it from the official Altera website. If the issue persists, try connecting the USB Blaster to a different USB port or using a different USB cable.
2. Q: While programming my FPGA using the Altera USB Blaster, I encounter a "Failed to program device" error. How can I troubleshoot this?
A: Verify that the USB Blaster is correctly connected to both the PC and the FPGA development board. Ensure that the JTAG connectors are securely attached. Also, double-check that the correct programming file is selected and that the target device is properly configured in the programming software.
3. Q: The status LED on my Altera USB Blaster remains off when connected to the PC. What might be causing this issue?
A: Make sure that the USB Blaster is receiving power by connecting it to a working USB port or externally powered hub. If you are using a USB hub, directly connect the USB Blaster to a USB port on your PC. If the LED still does not light up, try using a different USB cable or testing the USB Blaster on another PC to determine if the issue lies with the device or the computer.