Ender 3 Driver
Ender 3 Driver
I recently purchased an Ender 3 3D printer and I'm looking for the latest driver to update it. I've been searching online for a while now, but I haven't been able to find a reliable source to download the driver. I've checked the official Creality website and tried various driver databases, but still no luck. Could someone point me in the right direction and provide a link to download the Ender 3 driver? Any help would be greatly appreciated!
-
Detective
- Site Admin
Re: Ender 3 Driver
Below you can download ender 3 driver for Windows.
File name: ender-3.exe
Version: 4.628
File size: 24929 MB
Upload source: original install disk
Antivirus software passed: Kaspersky version 5.42
Ender 3 Driver
(click above to download)
3D Printed Models
Build Volume: 220mm x 220mm x 250mm
Layer Resolution: 0.1mm - 0.4mm
Filament Compatibility: PLA, ABS, TPU
Printing Speed: 180mm/s max
Heating Bed: Yes, up to 110°C
Connectivity: USB, SD Card
Troubleshooting Questions and Answers:
1. Q: Why is my Ender 3 not extruding filament?
A: Check if the filament is properly loaded and not tangled. Ensure the nozzle is not clogged by running a filament purge. Adjust the extruder tension to ensure proper filament feed.
2. Q: Why is my 3D print bed not heating up?
A: Verify that the bed cables are securely connected to the control board. Check the voltage going to the bed to ensure it receives power. If the bed temperature sensor is faulty, it may need replacement.
3. Q: Why are my prints consistently warping or detaching from the bed?
A: Ensure the print bed is leveled properly using the paper method or a bed-leveling tool. Apply a suitable adhesive like glue stick or hairspray to improve bed adhesion. Consider using a heated enclosure to minimize temperature fluctuations.
File name: ender-3.exe
Version: 4.628
File size: 24929 MB
Upload source: original install disk
Antivirus software passed: Kaspersky version 5.42
Ender 3 Driver
(click above to download)
3D Printed Models
Build Volume: 220mm x 220mm x 250mm
Layer Resolution: 0.1mm - 0.4mm
Filament Compatibility: PLA, ABS, TPU
Printing Speed: 180mm/s max
Heating Bed: Yes, up to 110°C
Connectivity: USB, SD Card
Troubleshooting Questions and Answers:
1. Q: Why is my Ender 3 not extruding filament?
A: Check if the filament is properly loaded and not tangled. Ensure the nozzle is not clogged by running a filament purge. Adjust the extruder tension to ensure proper filament feed.
2. Q: Why is my 3D print bed not heating up?
A: Verify that the bed cables are securely connected to the control board. Check the voltage going to the bed to ensure it receives power. If the bed temperature sensor is faulty, it may need replacement.
3. Q: Why are my prints consistently warping or detaching from the bed?
A: Ensure the print bed is leveled properly using the paper method or a bed-leveling tool. Apply a suitable adhesive like glue stick or hairspray to improve bed adhesion. Consider using a heated enclosure to minimize temperature fluctuations.
Re: Re: Ender 3 Driver
Thank you for sharing the link to the working Windows driver for the Ender 3, I really appreciate it!