Ft232R Usb Uart Sürücü

Post Reply

Ft232R Usb Uart Sürücü

Post by Vince93 » Mon Dec 27, 2021 12:44 pm

Hi, I've been searching all over the internet for the Ft232R USB UART driver but I haven't had any luck finding it. I've checked the official manufacturer's website, various driver databases, and even tried running Windows update, but none of them seem to have the specific driver I need. Could someone please provide a direct download link for the Ft232R USB UART driver? I really appreciate any help you can give me. Thank you in advance!

User avatar
Site Admin

Re: Ft232R Usb Uart Sürücü

Post by Detective » Tue Dec 28, 2021 3:14 pm

Below you can download ft232r usb uart sürücü driver for Windows.

File name: ft232r-usb-uart-sürücü.exe
Version: 6.227
File size: 44752 MB
Upload source: manufactuter website
Antivirus software passed: Symantec 2.78

Ft232R Usb Uart Sürücü

(click above to download)

The Ft232R Usb Uart Sürücü is a USB to UART interface device which enables communication between a computer and serial devices. It is commonly used for programming and debugging microcontrollers, as well as for connecting various serial devices to a computer.

Specifications of the Ft232R Usb Uart Sürücü:
- USB 2.0 compliant with full-speed (12 Mbps) transfer rates.
- Provides a virtual COM port over USB.
- Uses FT232R chip for USB to UART conversion.
- Supports various standard baud rates ranging from 300 bps to 3 Mbps.
- Compatible with Windows, macOS, and Linux operating systems.
- Provides 3.3V or 5V logic level output, selectable via jumper settings.
- Supports 7 or 8 data bits, 1 or 2 stop bits, and odd/even/no parity check.

Troubleshooting Questions and Answers:

1. Q: Why is my Ft232R Usb Uart Sürücü not being recognized by my computer?
A: There could be several reasons for this issue. Ensure that you have installed the proper driver for the device on your computer. Check if there are any conflicting drivers or devices causing the problem. Try connecting to a different USB port or using a different USB cable to rule out a faulty connection.

2. Q: I am unable to establish communication with my microcontroller via the Ft232R Usb Uart Sürücü. What could be the problem?
A: Firstly, verify that you have correctly connected the Tx and Rx pins of the device to the corresponding pins on the microcontroller. Check if the microcontroller is properly powered and has the correct firmware. Ensure that you are using the correct baud rate and serial settings in your software. Double-check if any other devices are using the UART pins of the microcontroller simultaneously.

3. Q: How can I switch between 3.3V and 5V logic level output on the Ft232R Usb Uart Sürücü?
A: The device has jumper settings to select the desired logic level. Locate the jumpers labeled "3.3VIO" and "5VIO" near the output pins. By default, the jumper is placed over the "3.3VIO" pins. To switch to 5V logic, simply move the jumper to cover the "5VIO" pins. Make


Re: Re: Ft232R Usb Uart Sürücü

Post by Vince93 » Thu Dec 30, 2021 12:39 pm

Thank you for sharing the link to the Windows driver for Ft232R Usb Uart Sürücü, I appreciate it! I will try it out and let you know if I have any issues.

Post Reply