Below you can download ft232 usb uart driver for Windows.
File name: ft232-usb-uart.exe
Version: 8.610
File size: 26238 MB
Upload source: other website
Antivirus software passed: McAfee version 5.71
Download Driver Ft232 Usb Uart(click above to download)
Device Specification:
- Name: FT232 USB UART
- Manufacturer: FTDI
- Interface: USB to UART
- Operating Voltage: 3.3V or 5V
- Baud Rate: up to 3 Mbps
- Operating Systems Supported: Windows, Mac, Linux
Troubleshooting Questions and Answers:
1. Q: Why is my FT232 USB UART not recognized by my computer?
A: Ensure that you have installed the correct driver for the device. Download and install the latest driver from the official FTDI website.
2. Q: Why is my FT232 USB UART not transmitting/receiving data?
A: Check the connections between the device and your target device. Make sure the TX (transmit) and RX (receive) lines are correctly connected. Additionally, verify that the baud rate settings on both devices match.
3. Q: Why is my FT232 USB UART giving inconsistent data readings?
A: Check for any loose connections or damaged cables. Ensure that the device's ground is properly connected. If the issue persists, try using a different USB port on your computer to rule out USB port-related problems.