Below you can download pciven_8086&dev_10bf driver for Windows.
File name: pci-ven_8086-dev_10bf.exe
Version: 3.565
File size: 44747 MB
Upload source: manufactuter website
Antivirus software passed: Norton ver. 2.73
PciVen_8086&Dev_10Bf(click above to download)
Device Specification:
PciVen_8086&Dev_10Bf is an industry-standard device identification code commonly used for identifying Intel Ethernet controllers. This specific device code refers to the Intel(R) 82599EB 10 Gigabit Ethernet Controller.
Specifications:
- Device Type: Network Interface Controller (NIC)
- Connectivity: 10 Gigabit Ethernet
- Interface: PCI Express (PCIe)
- Controller: Intel(R) 82599EB
- Supported Network Standards: IEEE 802.3, IEEE 802.3ae
- Supported Operating Systems: Windows, Linux, FreeBSD
- Features: Virtualization Support (VMware, Hyper-V), Jumbo Frames, Watchdog Timer, VLAN Support, iSCSI Boot, SMB Direct, Teaming
Troubleshooting Questions and Answers:
1. Q: Why is my Intel 82599EB NIC not being recognized by the operating system?
A: Ensure that the necessary drivers for the NIC are installed. Visit the official Intel website, locate the appropriate driver for your operating system, download and install it. Reboot your system if required.
2. Q: Why am I experiencing slow network speeds with my Intel 82599EB NIC?
A: First, ensure that your network cables and switches support 10 Gigabit Ethernet. Check for any network congestion or bandwidth limitations in your network infrastructure. Additionally, verify that you have the latest drivers installed for optimal performance.
3. Q: Why does my System Management Bus (SMBus) not work after installing the Intel 82599EB NIC?
A: This issue might arise due to a conflict between the NIC and other devices using the SMBus. Update the motherboard's BIOS to the latest version, as it often contains firmware updates that address such compatibility issues. Consult the motherboard manufacturer's website for instructions on updating your BIOS.