Below you can download sharp mx-m266n sterowniki driver for Windows.
File name: sharp-mx-m266n-sterowniki.exe
Version: 6.523
File size: 27089 MB
Upload source: search engine
Antivirus software passed: G Data version 1.76
Sharp Mx-M266N Sterowniki(click above to download)
Specifications of the Sharp MX-M266N:
- Device Type: Monochrome Laser Multifunction Printer
- Print Speed: Up to 26 pages per minute
- Print Resolution: 1200 x 1200 dpi
- Paper Sizes: A3, A4, A5, B4, B5
- Maximum Paper Capacity: 2,100 sheets (with optional trays)
- Duplex Printing: Yes
- Scan Speed: Up to 50 images per minute (single-sided), up to 100 images per minute (double-sided)
- Scan Resolution: 600 x 600 dpi
- Copy Speed: Up to 26 pages per minute
- Zoom Range: 25% to 400%
- Fax Transmission Speed: Approximately 3 seconds per page
- Connectivity: USB, Ethernet, Wireless (optional)
- Dimensions: 610 mm x 591 mm x 725 mm
- Weight: 48 kg
Troubleshooting Questions and Answers:
Q1: Why is the printed document coming out with faded or poor quality prints?
A1: This issue could be due to low toner levels. Verify the toner level using the device's menu options and replace the toner cartridge if necessary. Additionally, inspect the print settings for any low-quality or economy mode enabled.
Q2: Why is the scanner not functioning properly and producing distorted or incomplete scans?
A2: First, ensure that the original document is properly aligned and free from any wrinkles or debris that may obstruct the scanning process. Secondly, clean the scanner glass gently with a lint-free cloth to remove any smudges or dirt that could interfere with the scan quality. If the issue persists, power cycle the device and try scanning again.
Q3: Why does the printer keep displaying a paper jam error message even though no jammed paper is visible?
A3: It is possible that small paper fragments might be stuck inside the printer, triggering the sensor to detect a jam. Open all the printer access doors and carefully inspect for any debris or torn paper bits. Gently remove them using tweezers or compressed air. If the error message persists, try resetting the printer by turning it off and unplugging it for a few minutes before powering it back on.