Below you can download zebra zd420 driver for Windows.
File name: zebra_zd420.exe
Version: 4.894
File size: 19.56 MB
Upload source: original install disk
Antivirus software passed: G Data v. 2.63
Zebra Zd420 Driver Download(click above to download)
Device specification:
- Model: Zebra Zd420
- Compatibility: Windows, Mac, and Linux operating systems
- Printing technology: Thermal transfer or direct thermal printing
- Print speed: Up to 6 inches per second
- Print resolution: 203 dpi (dots per inch)
- Interface: USB, Ethernet, and Bluetooth connectivity options
- Media types: Thermal labels and tags
- Media width: 0.585" (15 mm) to 4.65" (118 mm)
- Media roll diameter: Up to 5" (127 mm)
- Dimensions: 7.0" (177 mm) H x 7.0" (177 mm) W x 10.0" (254 mm) D
- Weight: 3.1 lbs (1.4 kg)
Troubleshooting questions and answers:
1. Q: My Zebra Zd420 printer is not printing anything. What could be the issue?
A: There could be several reasons for this issue. Please check if the printer is properly connected to the computer and the power source. Ensure that the printer has the necessary paper or labels loaded correctly. Additionally, check the printer settings and make sure it is selected as the default printer.
2. Q: The printed labels from my Zebra Zd420 printer are coming out faint or faded. How can I resolve this problem?
A: This issue may occur due to low print density settings or low ink/ribbon levels. Adjust the print density settings through the printer properties on your computer. If using thermal transfer printing, ensure that the ink/ribbon is properly installed and hasn't expired. If the issue persists, try replacing the ink/ribbon cartridge.
3. Q: My Zebra Zd420 printer is displaying an error status light. What should I do?
A: Different error light patterns indicate various issues. Refer to the printer's user manual for a detailed explanation of the error light patterns. However, in general, you can try the following steps:
- Power cycle the printer by turning it off, waiting for a few seconds, and then turning it back on.
- Check for any paper jams or obstructions in the print mechanism.
- Ensure that the ink/ribbon is properly installed and not empty.
- If the issue persists, consider performing a factory reset or contacting the manufacturer's support for further assistance.
Note: The above troubleshooting questions and answers are based on common