Below you can download tsxcusb driver for Windows.
File name: tsxcusb.exe
Version: 5.699
File size: 18.64 MB
Upload source: original install disk
Antivirus software passed: Eset version 4.17
Tsxcusb Driver(click above to download)
USB to RS485 converter
Power supply: USB powered
Interface: USB 2.0
Data transfer rate: Up to 12 Mbps
Operating systems support: Windows XP/Vista/7/8/10, Linux, Mac
Driver compatibility: Compliant with MODBUS communication protocol
Troubleshooting Questions:
1. Q: Why is my USB to RS485 converter not being recognized by my computer?
A: Firstly, ensure that the device is properly connected to the computer's USB port. If it is connected, try using a different USB port or cable. Additionally, check if the device drivers are installed correctly. If not, reinstall the Tsxcusb driver from the manufacturer's website.
2. Q: Why am I experiencing slow data transfer rates with the USB to RS485 converter?
A: Slow data transfer rates might occur due to various reasons. Check if any other applications or programs are using substantial system resources while using the converter. To improve data transfer performance, close unnecessary applications and processes. Also, ensure that the USB port being used is a high-speed USB 2.0 port, as using an outdated or low-speed port can result in slower transfer rates.
3. Q: My USB to RS485 converter is not communicating with the MODBUS device. What can I do?
A: Firstly, verify the physical connections between the converter, MODBUS device, and the RS485 network. Ensure that the wiring is correct and the devices are properly powered on. If the physical connections are fine, double-check the MODBUS communication settings on the connected software or device you are using. Make sure that the correct communication parameters such as baud rate, data bits, parity, and stop bits are configured. If the issue persists, consider checking the compatibility of the converter with the specific MODBUS device or consult the manufacturer's support for further assistance.