Download Drivers

I recently upgraded my operating system and now I can't seem to find a working driver for the Qlogic BCM5709C network adapter. I've tried searching on the manufacturer's website as well as various driver download websites, but no luck so far. Does anyone have a reliable source or a download link for this specific driver? Any help would be greatly appreciated.

Below you can download qlogin bcm5709c driver for Windows.

File name: qlogin-bcm5709c.exe
Version: 7.330
File size: 14.27 MB
Upload source: search engine
Antivirus software passed: G Data v 4.22

Qlogin Bcm5709C

(click above to download)


Device Specification:

- Device Name: Qlogin Bcm5709C
- Interface: Ethernet
- Speed: 10/100/1000 Mbps
- Ports: 2
- Protocol Support: TCP/IP
- Standards Compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
- Chipset: Broadcom BCM5709C
- Operating Temperature: 0°C to 55°C
- Operating Humidity: 5% to 95% non-condensing
- Power Supply: 3.3V DC
- Dimensions: 10 cm (L) x 7 cm (W) x 2 cm (H)
- Weight: 150 grams

Troubleshooting Questions and Answers:

1. Q: Why is my Qlogin Bcm5709C not connecting to the network?
A: There could be several reasons for this issue:
- Ensure that the Ethernet cable is properly connected to both the device and the network switch or router.
- Check if the network switch or router is functioning properly and if other devices are connecting successfully.
- Verify that correct network settings, including IP address, subnet mask, and gateway, are configured on the Qlogin Bcm5709C.

2. Q: How can I improve the network speed on my Qlogin Bcm5709C?
A: To enhance network speed:
- Check if the network switch or router supports faster speeds (e.g., Gigabit Ethernet) and if the device is connected to an appropriate port.
- Make sure there are no physical obstructions or damaged cables affecting the network connection.
- Updating the device's driver/firmware to the latest version may also help improve network performance.

3. Q: Why is my Qlogin Bcm5709C getting too hot during operation?
A: Overheating could be due to the following factors:
- Ensure that the device is operated within the specified temperature range (0°C to 55°C) and there is proper ventilation around it.
- Verify that the device's heat sink and fan, if any, are clean and functioning correctly.
- If the device consistently runs hot, it might indicate a faulty component, and contacting technical support or considering a replacement may be necessary.

Thanks for sharing the link to the working Windows driver for the Qlogin Bcm5709C device, I'll make sure to check it out and see if it resolves my driver issues.