Below you can download zdesigner lp 2844 driver for Windows.
File name: zdesigner-lp-2844.exe
Version: 9.178
File size: 18.72 MB
Upload source: original install disk
Antivirus software passed: Kaspersky v. 4.37
Zdesigner Lp 2844 Driver(click above to download)
Specifications of the Zdesigner Lp 2844 Driver:
- Manufacturer: Zebra Technologies
- Model: LP 2844
- Type: Direct thermal label printer
- Connectivity: USB, serial, and parallel interfaces
- Maximum Print Resolution: 203 dpi
- Maximum Print Speed: 4 inches per second
- Maximum Label Width: 4.25 inches
- Maximum Label Length: 11 inches
- Memory: 8 MB Flash, 8 MB SDRAM
- Supported Media Types: Roll or fan-fold, die-cut or continuous, direct thermal labels, tags, and receipt paper
- Compatible Operating Systems: Windows, Mac, and Linux
- Power Source: External power supply (included)
Troubleshooting Questions & Answers:
1. Question: Why is my Zdesigner LP 2844 not printing anything?
Answer: Firstly, ensure that the printer is powered on and connected properly. Check if there is any paper jammed inside the printer, remove it if found. Verify that you have selected the correct printer driver and that it is up to date. Finally, examine the print settings to make sure they are configured correctly.
2. Question: Why does my Zdesigner LP 2844 produce blurry prints?
Answer: Blurry prints could be a result of misaligned print-head. Open the printer's cover and inspect the print-head assembly. If necessary, clean the print-head using a lint-free cloth and isopropyl alcohol. Additionally, check the label media for any wrinkles or debris that could affect the print quality.
3. Question: My Zdesigner LP 2844 keeps on skipping labels while printing. How can I fix this issue?
Answer: Skipping labels might indicate a sensor calibration problem. Start by calibrating the label sensors through the printer's control panel or software settings. Ensure that the label media is properly aligned and that the label gap or black mark is detected by the printer's sensors. If the issue persists, check for any sensor blockages or mechanical issues that might hinder accurate label detection.