Download Drivers

Hi everyone, I've been trying to find the driver for the Cp2102 on Windows 10, but so far, I've had no luck. I've searched extensively on the manufacturer's website, various driver update forums, and even tried using generic drivers for similar devices, but none of them seem to work properly. Could someone please provide me with a direct link to the driver for Cp2102 that is specifically compatible with Windows 10? Any help would be greatly appreciated. Thank you!

Below you can download cp2102 windows 10 driver for Windows.

File name: cp2102-win10.exe
Version: 3.958
File size: 29068 MB
Upload source: search engine
Antivirus software passed: McAfee v. 4.38

Cp2102 Driver Windows 10

(click above to download)


Device Specification:
- Model: Cp2102
- Driver Compatibility: Windows 10
- Connectivity: USB
- Protocols supported: USB to UART/RS-232
- Maximum Baud Rate: 1 Mbps
- Voltage Levels: 1.8V to 3.3V
- GPIO Pins: 2
- Operating Temperature Range: -40°C to +85°C
- Package Type: QFN (Quad Flat No-leads)
- Dimensions: 5mm x 5mm

Troubleshooting Questions and Answers:

Q1: The device is not recognized by my Windows 10 computer. What can I do?
A1: Please ensure that you have properly installed the Cp2102 driver for Windows 10. You can download the latest driver from the manufacturer's website. Additionally, try using a different USB port or cable to rule out any potential connection issues.

Q2: I am unable to establish a UART or RS-232 communication with the device. What might be the problem?
A2: First, double-check if you have correctly connected the device to the UART/RS-232 interface. Ensure that the device's voltage levels match the requirements of your connected device. If the issue persists, verify if the UART/RS-232 protocol settings are correctly configured on your host system.

Q3: The device's GPIO pins do not seem to be functioning as expected. How can I troubleshoot this?
A3: If the GPIO pins are not working, ensure that they are correctly configured in your application's software or firmware. Check if the device's GPIO pins are properly connected to the external circuitry or devices. If you are using multiple GPIO pins simultaneously, ensure they are not conflicting with each other in terms of functionality or voltage levels.

I appreciate you sharing the link to the working Windows driver for the Cp2102 device, it was really helpful in resolving my driver issues on Windows 10. Thank you!