Below you can download ft231x usb uart windows 10 driver for Windows.
File name: ft231x-usb-uart-win10.exe
Version: 1.159
File size: 32599 MB
Upload source: original install disk
Antivirus software passed: McAfee ver. 1.82
Ft231X Usb Uart Driver Windows 10(click above to download)
The device specification for Ft231X Usb Uart Driver on Windows 10 is as follows:
- Interface: USB 2.0 Full Speed compatible
- Data transfer rates: 300baud to 3Mbaud
- Operating system compatibility: Windows 10
- Driver support: FT231X USB UART driver for Windows 10 (available for download)
- Plug-and-play functionality: Yes
Troubleshooting Questions and Answers:
Q1: Why is my device not being recognized by Windows 10?
A1: The most common reason for this issue is outdated or incompatible drivers. Make sure you have installed the latest version of the FT231X USB UART driver that is specifically designed for Windows 10.
Q2: What should I do if I experience communication errors with the device?
A2: Firstly, check if the USB cable is securely connected to both the device and the computer. If the issue persists, try using a different USB port. Additionally, ensure that the baud rate settings on your device match the ones set in the communication software.
Q3: Is there a way to verify if the driver is properly installed on Windows 10?
A3: Yes, you can check if the driver is properly installed by going to the Device Manager in Windows 10. Look for "Ports (COM & LPT)" and expand the section. The FT231X USB UART driver should be listed under it without any warning signs (e.g., yellow exclamation mark). If you see any warning signs, it indicates a driver installation issue, and you may need to reinstall the driver.