Below you can download connection in use driver for Windows.
File name: connection-in-use.exe
Version: 4.976
File size: 29646 MB
Upload source: original install disk
Antivirus software passed: Eset v 3.79
Connection In Use(click above to download)
Audio Output
Power Source: Battery or USB
Controls: On/Off switch, volume control
Compatibility: Compatible with all devices with audio output
Wireless Connectivity: Bluetooth
Speaker: Mono speaker
Troubleshooting Questions and Answers:
Question 1: My device is not connecting to Bluetooth. What should I do?
Answer: First, ensure that the device is in pairing mode. Then, check if the Bluetooth is enabled on your device and make sure it is within the range of the speaker. If the issue persists, try restarting both devices and attempt to pair again.
Question 2: The audio output is distorted or not clear. What could be the problem?
Answer: The distortion may be caused by a low battery. Try charging the device and check if the issue is resolved. If the battery is not the problem, verify if the audio source is producing clear sound. If there are still issues, there might be a hardware problem, and contacting customer support would be recommended.
Question 3: My device is not turning on. What could be the issue?
Answer: First, ensure that the battery is charged or the device is connected to a power source properly. If the issue persists, try holding down the power button for a few seconds to reset it. If none of these steps work, there may be a faulty power circuit, and professional assistance should be sought.