Below you can download pilote ender 3 driver for Windows.
File name: pilote-ender-3.exe
Version: 1.730
File size: 44866 MB
Upload source: manufactuter website
Antivirus software passed: F-Secure 2.75
Pilote Ender 3(click above to download)
Specification:
- Model: Ender 3
- Manufacturer: Creality
- Printing Technology: FDM (Fused Deposition Modeling)
- Build Volume: 220mm x 220mm x 250mm
- Layer Resolution: 0.1 - 0.4mm
- Filament Diameter: 1.75mm
- Nozzle Diameter: 0.4mm
- Printing Speed: 180mm/s max
- Connectivity: SD card or USB
- Compatible Filament Types: PLA, ABS, TPU, PETG, and others
- Power Supply: 24V
- Bed Leveling: Manual
- LCD Screen: Yes
- Supported Operating Systems: Windows, Mac, and Linux
Troubleshooting Questions and Answers:
1. Why is the print not sticking properly to the bed?
Possible cause: Incorrect bed leveling
Solution: Re-level the bed following the manufacturer's instructions and ensure the nozzle height is properly adjusted for proper adhesion.
2. Why is the extruder motor making clicking noises?
Possible cause: Filament jam or insufficient extrusion
Solution: Check if the filament is tangled or bent and clear any blockages. Increase the nozzle temperature slightly to allow smooth extrusion. Ensure that the filament path is clear and properly inserted into the extruder.
3. Why are there visible lines or inconsistencies in the printed object?
Possible cause: Incorrect belt tension or loose components
Solution: Check the tension of the belts and tighten if necessary. Ensure that all components, such as screws and pulleys, are properly tightened. Also, verify that the stepper motor drivers are properly configured in the printer's firmware settings.