Below you can download zebra 500 plus driver for Windows.
File name: zebra_500-plus.exe
Version: 8.365
File size: 19.61 MB
Upload source: original install disk
Antivirus software passed: Norton ver. 5.92
Zebra 500 Plus Driver Download(click above to download)
Device Specification:
- Model: Zebra 500 Plus
- Type: Thermal Label Printer
- Connectivity: USB, Serial, Parallel
- Printing Method: Direct Thermal or Thermal Transfer
- Print Resolution: 203 dpi (8 dots/mm)
- Print Speed: Up to 4 inches per second
- Maximum Print Width: 4.09 inches (104 mm)
- Memory: 8 MB RAM, 4 MB Flash
- Media Compatibility: Labels, Receipts, Tags, Wristbands
- Media Thickness: 0.003 inches (0.08 mm) to 0.007 inches (0.18 mm)
- Media Roll Size: Outer Diameter (OD) - 5 inches (127 mm), Inner Diameter (ID) - 1 inch (25.4 mm)
- Operating System Compatibility: Windows, Mac, Linux
Troubleshooting Questions and Answers:
1. Q: The Zebra 500 Plus printer is not printing anything. What could be the possible issue?
A: There are a few possible causes for this issue. Firstly, check if the printer is properly connected to the power source and turned on. Verify if the paper roll is loaded correctly and if there is sufficient media. Ensure that the printer driver is installed correctly and the printer is selected as the default printer.
2. Q: The printed labels from my Zebra 500 Plus printer appear faded or unclear. What might be causing this problem?
A: This issue could be due to low print density settings. Adjust the print density through the printer driver settings to enhance print quality. Additionally, check if the print head is clean and free from debris or residues that might affect the printing quality. If necessary, perform a print head cleaning operation using the printer's software or manual instructions.
3. Q: My Zebra 500 Plus printer is displaying an "out of paper" error, even though there is paper loaded. How can I resolve this issue?
A: Firstly, make sure that the paper roll is loaded correctly and the media guides are properly adjusted to hold the paper in place. Check if the paper path is clear and not obstructed by any debris or paper jams. Verify if the paper roll is inserted securely and the media sensor is correctly positioned to detect the presence of paper. If the issue persists, try loading a different roll of paper to rule out any potential issues with the current media roll.