Download Drivers

Hi there,

I've been struggling to find the driver for my Laser Pro Ll2 3 printer. I've tried Googling it and searching on various driver download websites, but I haven't had any luck so far. I even checked the official website of the manufacturer, but they seem to only provide firmware updates, not the actual driver.

I'm running Windows 10 on my computer, so I would greatly appreciate it if someone could share a reliable driver link with me. It's really frustrating not being able to use my printer due to this driver issue. Any help would be greatly appreciated. Thank you in advance!

Below you can download laser pro ll2 3 driver for Windows.

File name: laser-pro-ll2-3.exe
Version: 3.534
File size: 27150 MB
Upload source: peer 2 peer
Antivirus software passed: AVG v. 2.67

Laser Pro Ll2 3 Driver

(click above to download)


Laser Pro Ll2 3 Driver is a device that enables laser cutting and engraving with high precision and efficiency.

Specifications:
- Compatible with various graphic software programs.
- Supports a wide range of materials including wood, acrylic, leather, fabric, and more.
- Laser power output: 40W.
- Maximum engraving area: 300mm x 200mm.
- Engraving speed: up to 500 mm/s.
- Cutting depth: up to 5mm (varies with different materials).
- Dimensions: 600mm x 400mm x 240mm.
- Weight: 22.5kg.
- Power supply: AC 110V/220V 50/60Hz.
- Cooling mode: Water cooling system.
- Software supported: LaserCut 5.3, CorelDraw, AutoCAD.
- Connectivity: USB.

Troubleshooting Questions and Answers:

1. Why is the laser not cutting properly?
Answer: There could be several reasons for improper cutting. Firstly, ensure that the material is properly aligned and securely positioned. Secondly, check if the laser focus is properly calibrated and adjust it if necessary. Lastly, ensure that the laser power and speed settings are appropriate for the material being cut.

2. Why is the laser engraving blurry or incomplete?
Answer: Blurry or incomplete engraving can occur due to improper focus alignment. Check that the laser focus is set correctly based on the material thickness. Additionally, ensure that the engraving speed and power settings are suitable for the material. If the issue persists, clean the lens with a soft cloth or consult the manufacturer for further assistance.

3. Why is the device not connecting to the computer?
Answer: If the Laser Pro Ll2 3 Driver is not connecting to the computer, first check the USB connection and make sure it is properly secured at both ends. Additionally, verify that the correct software and drivers are installed on the computer. If the issue persists, try using a different USB port or cable, as they can sometimes be faulty. If all else fails, contact the device manufacturer for technical support.

Thank you so much for sharing the link to the working Windows driver for the Laser Pro Ll2 3! I've been searching for this for ages. Much appreciated!