Below you can download dlink dfe-520tx driver for Windows.
File name: dlink-dfe-520tx.exe
Version: 4.143
File size: 44727 MB
Upload source: manufactuter website
Antivirus software passed: Norton ver. 4.75
Dlink Dfe-520Tx(click above to download)
The D-Link DFE-520TX is a network interface card (NIC) designed for desktop computers. It provides reliable and high-speed wired connectivity to your local area network (LAN).
Key Specifications:
- Interface: PCI
- Network Standard: IEEE 802.3, IEEE 802.3u, IEEE 802.3x
- Data Transfer Rates: 10/100Mbps, half-duplex/full-duplex
- LED Indicators: Link/Activity
- Operating System Compatibility: Windows XP, Vista, 7, 8, 10; Linux; Mac OS
Troubleshooting Questions and Answers:
1. Q: Why is the link light on the DFE-520TX NIC not turning on?
A: Ensure that the Ethernet cable is securely inserted into both the NIC port and the network switch/router. Check if the network port on the switch/router is functioning properly. Try using a different cable to isolate any potential cable-related issues.
2. Q: My computer is unable to connect to the network after installing the DFE-520TX. What could be the problem?
A: Make sure that the device driver for the DFE-520TX is installed correctly on your computer. Verify that the NIC is seated properly in the PCI slot. Check if the NIC is enabled in your computer's BIOS settings. Troubleshoot your network settings and confirm that DHCP is enabled.
3. Q: I'm experiencing slow network speeds with the DFE-520TX. How can I improve the performance?
A: Confirm that the switch/router you are connected to supports the 100Mbps speed. Ensure your Ethernet cables are in good condition and not excessively long. Check for any network congestion or interference. You may consider updating the device driver or performing a firmware update on the DFE-520TX to enhance its performance.