Below you can download cp2102 usb to uart bridge controller driver for Windows.
File name: cp2102-usb-to-uart-bridge-controller.exe
Version: 2.144
File size: 13.16 MB
Upload source: search engine
Antivirus software passed: Avira version 4.67
Cp2102 Usb To Uart Bridge Controller Driver(click above to download)
Device Specification: Cp2102 Usb To Uart Bridge Controller Driver
- USB to UART bridge controller driver
- Enables communication between USB and UART interfaces
- Allows data transmission between a computer and devices with UART interface (such as microcontrollers, embedded systems, and other peripherals)
- Supports USB 2.0 full-speed mode
- Provides 3.3V regulation output for external components
- Offers up to 12 Mbps USB data transfer rate
- Supports 300 bps to 2 Mbps UART data transfer rate
- Compatible with Windows, Mac, and Linux operating systems
- Compact and easy to install
Troubleshooting Questions and Answers:
1. Q: Why is my computer not recognizing the Cp2102 Usb To Uart Bridge Controller Driver?
A: There could be several reasons for this issue. Please try the following troubleshooting steps:
- Ensure that the driver is properly installed on your computer.
- Make sure the USB cable is securely connected to both the device and the computer.
- Try connecting the device to different USB ports on your computer.
- Restart your computer and try again.
- If the problem persists, try using a different USB cable or testing the device on another computer.
2. Q: Why am I experiencing slow data transfer rates with the Cp2102 Usb To Uart Bridge Controller Driver?
A: Slow data transfer rates can be caused by various factors. Here are a few troubleshooting steps:
- Check if any other programs or processes on your computer are consuming excessive resources, which could impact data transfer.
- Try using a different USB port on your computer.
- Ensure that the USB cable is of good quality and not damaged.
- Update the driver to the latest version from the manufacturer's website.
- If the issue persists, test the device on another computer to rule out any potential computer-specific issues.
3. Q: Why is my device not receiving any data from the Cp2102 Usb To Uart Bridge Controller Driver?
A: If you're experiencing issues with data transmission, follow these troubleshooting steps:
- Check the connections between your device and the controller driver. Make sure they are properly connected.
- Verify that the UART settings (such as baud rate, parity, and stop bits) on your device match the settings configured in the driver software.
- Ensure that the device you are trying to communicate with is powered on and functioning correctly.
-