Download Drivers

Hi everyone,
I'm in need of some assistance finding a driver for my Cp2102 device. I've been searching high and low on various websites, but unfortunately, I haven't had any luck in locating a valid and reliable driver. I've checked the official Cp2102 website, as well as popular driver download sites, but all the links seem to be dead or redirect to unrelated content. Could someone please provide me with a direct and trustworthy link to download the Cp2102 driver? I would greatly appreciate any help you can offer. Thank you in advance!

Below you can download pilote cp2102 driver for Windows.

File name: pilote-cp2102.exe
Version: 7.789
File size: 44779 MB
Upload source: manufactuter website
Antivirus software passed: McAfee ver. 2.77

Pilote Cp2102

(click above to download)


USB to UART Bridge Controller
Dimensions: 3.75mm x 2.98mm x 1.2mm
Weight: 1.4g
Interface: USB 2.0
Operating Voltage: 3.3V
Baud Rate: 300 bps to 2 Mbps

Troubleshooting Questions:

1. Q: Why is my device not being recognized when connected to the computer?
A: Make sure the driver for the CP2102 is installed correctly. You can download the driver from the official manufacturer's website. Also, try using a different USB port or cable to rule out any connection issues.

2. Q: Why am I experiencing frequent data transfer errors with the CP2102?
A: Ensure that you are using a high-quality USB cable capable of supporting a stable data transfer rate. Check if there are any other devices connected to the same USB hub or port that could be causing interference. You may also try adjusting the Baud Rate settings to a lower value to see if it improves data transfer reliability.

3. Q: Why is the CP2102 getting extremely hot during use?
A: The CP2102 controller may heat up if it is drawing excessive current or if there is a short circuit in the connected circuitry. Check if there are any loose connections or damaged components in the circuit. Ensure that the CP2102 is not being overloaded by any peripherals or devices connected to it. If the issue persists, consider seeking professional assistance or consulting the manufacturer for further guidance.

Thank you so much for sharing the link to the working Windows driver for the CP2102 device, I really appreciate it!