Below you can download pciven_8086&dev_a13a&subsys_10331025&rev_31 driver for Windows.
File name: pci-ven_8086-dev_a13a_subsys_10331025-rev_31.exe
Version: 3.756
File size: 16.17 MB
Upload source: search engine
Antivirus software passed: AVG v 4.91
PciVen_8086&Dev_A13A&Subsys_10331025&Rev_31(click above to download)
Device: PCI Device
Model: PciVen_8086&Dev_A13A&Subsys_10331025&Rev_31
Specifications:
- Interface: PCI (Peripheral Component Interconnect)
- Vendor ID: 8086
- Device ID: A13A
- Subsystem ID: 10331025
- Revision: 31
Troubleshooting Questions and Answers:
1. Q: Why is my PCI device not being detected by the computer?
A: This issue could occur due to several reasons. First, ensure that the device is correctly inserted into the PCI slot on the motherboard. Verify that the device drivers are properly installed. If not, download and install the latest drivers from the manufacturer's website. Additionally, check if the device is disabled in the Device Manager. If so, enable it and restart the computer.
2. Q: How can I update the drivers for my PCI device?
A: To update the drivers for your PCI device, follow these steps:
1. Identify the manufacturer and model of the device by checking device properties in the Device Manager.
2. Visit the manufacturer's website and navigate to the support/downloads section.
3. Look for the appropriate driver for your specific model and download it.
4. Once downloaded, run the driver installation program and follow the on-screen instructions.
5. Restart your computer to complete the driver update.
3. Q: What should I do if my PCI device is causing system instability or crashes?
A: If your PCI device is causing system instability or crashes, try the following steps:
1. Make sure you have updated the drivers for the PCI device to the latest version as outdated drivers can cause compatibility issues.
2. Check for any BIOS updates for your motherboard and install them if available. Sometimes, BIOS updates address compatibility problems.
3. Verify that the device is properly seated in the PCI slot. Reseat the device if necessary.
4. If the issue persists, try temporarily removing the PCI device from the system and see if the instability or crashes stop. If they do, the PCI device may be faulty and require replacement.