Driver Request Hub - Download Drivers

Hey everyone,

I recently purchased a Xerox C400 printer and I have been having trouble finding the driver for it. I have tried searching on the official Xerox website, as well as other driver download websites, but I can't seem to find the specific driver I need.

I'm running Windows 10 on my computer, and I've tried using the built-in Windows update feature to automatically find and install the driver, but it didn't work.

I was wondering if anyone here could help me out and provide a direct link to download the driver for the Xerox C400? I would greatly appreciate it!

Thanks in advance!

Below you can download xerox c400 driver for Windows.

File name: xerox-c400.exe
Version: 3.187
File size: 44445 MB
Upload source: other website
Antivirus software passed: AVG v. 3.50

Download Driver Xerox C400

(click above to download)


This is a forum post for the specifications and troubleshooting questions regarding the Xerox C400 device.

Specifications:
- Type: Color Laser Printer
- Printing Technology: Laser
- Print Speed: Up to 36 pages per minute (ppm) for both color and black and white
- Resolution: Up to 600 x 600 dpi (dots per inch)
- Paper Sizes: A4, A5, Letter, Legal, Executive, Custom Sizes
- Paper Capacity: Up to 550 sheets (250-sheet standard tray and 50-sheet multipurpose tray)
- Connectivity: USB 3.0, Ethernet, Wireless
- Supported Operating Systems: Windows (7/8/10), Mac OS X (10.10 or later), Linux

Troubleshooting Questions and Answers:

1. Problem: The printer is not responding and fails to print any documents. What could be the issue?
Solution:
- Ensure that the printer is powered on and connected to a working power source.
- Check the printer's display panel for any error messages or warnings.
- Verify that the printer is properly connected to the computer via USB, Ethernet, or wireless, and restart both the printer and computer if necessary.

2. Problem: The printed documents show streaks or smudges on the pages. What should I do?
Solution:
- Make sure the paper being used meets the recommended specifications and is not damp or wrinkled.
- Clean the printer's print heads or toner cartridges as per the device's manual instructions.
- If the problem persists, try replacing the toner cartridges or contacting customer support for further assistance.

3. Problem: The printer is connected to the network, but it cannot be detected by any device in the network. How can I troubleshoot this issue?
Solution:
- Double-check the network connections and make sure the printer is connected to a working Ethernet or Wi-Fi network.
- Restart both the printer and the router to refresh the network settings.
- If the problem persists, disable any firewall or antivirus software that might block the printer's communication and try again. Alternatively, assign a static IP address to the printer to ensure consistent network connectivity.

Please note that these answers are general troubleshooting suggestions and might vary depending on the specific situation. Always consult the printer's manual or contact customer support for detailed guidance.

Thank you so much for sharing the link to the working Windows driver for the Xerox C400, it saved me a lot of time and hassle!