Below you can download telecharger arduino uno windows 10 driver for Windows.
File name: telecharger-arduino-uno_win10.exe
Version: 1.155
File size: 15067 MB
Upload source: manufactuter website
Antivirus software passed: AVG ver. 2.29
Telecharger Driver Arduino Uno Windows 10(click above to download)
Device Specification:
- Name: Arduino Uno
- Operating System Compatibility: Windows 10
- Connectivity: USB
- Microcontroller: ATmega328P
- Digital Input/Output Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 6
- DC Current per I/O Pin: 20 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB (0.5 KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
Troubleshooting Questions and Answers:
1. Q: Why is my Arduino Uno not being recognized by my Windows 10 computer?
A: Troubleshoot the issue by trying the following steps:
- Ensure the Arduino Uno is powered on and properly connected to the computer via USB.
- Make sure you have the necessary drivers installed. Download and install the official Arduino software, which includes the drivers.
- Try using a different USB cable or USB port on your computer to rule out any cable or port issues.
- Check the Device Manager on your Windows 10 computer to see if the Arduino Uno appears under the "Ports (COM & LPT)" section. If not, try uninstalling any unrecognized or non-working device entries and reconnect the Arduino Uno to trigger driver reinstallation.
2. Q: Why is my Arduino Uno not uploading sketches?
A: If you are experiencing issues while uploading sketches to your Arduino Uno, follow these steps for troubleshooting:
- Ensure the correct board (Arduino Uno) and port are selected in the Arduino IDE.
- Double-check your sketch for any errors or compatibility issues. Make sure all required libraries are correctly installed.
- Press the reset button on the Arduino Uno just before initiating the upload process to ensure a clean start.
- If you recently installed any new software or drivers, try uninstalling them and restarting the computer. Some conflicting programs may interfere with the uploading process.
- If all else fails, try using a different USB cable or a different computer to verify if the issue is specific to your setup.
3. Q: Why is my Arduino Uno not providing expected output or responding properly?
A: If your Arduino Uno is not working as expected, consider the following troubleshooting steps:
- Verify that you have correctly wired the necessary components and sensors according to your project requirements. Double-check your circuit