Download Drivers

I recently upgraded my system to Windows 10 and I'm experiencing some issues with my Sandisk Extreme SSD. I am in need of the driver for this device for Windows 10, but I've been unable to locate it on the official Sandisk website. I've tried searching for the driver using various keywords on search engines, checking the Sandisk support page, and even going through the list of available drivers in the Windows Device Manager, but no luck so far. Could someone kindly provide me with a direct link to download the Sandisk Extreme SSD driver for Windows 10? Any assistance would be greatly appreciated!

Below you can download sandisk extreme ssd windows 10 driver for Windows.

File name: sandisk-extreme-ssd_win10.exe
Version: 4.594
File size: 44329 MB
Upload source: original install disk
Antivirus software passed: G Data v. 4.34

Sandisk Extreme Ssd Driver Windows 10

(click above to download)


Device Specification:

- Brand: Sandisk
- Model: Extreme SSD
- Compatible with: Windows 10
- Type: Solid State Drive
- Connectivity: USB 3.1 Gen 2 Type-C
- Storage Capacity: Various options available (e.g., 500GB, 1TB, 2TB)
- Read Speed: Up to 550MB/s
- Write Speed: Up to 500MB/s
- Interface: USB 3.1 Gen 2
- Shock Resistance: Up to 1500G
- Encryption: 128-bit AES encryption
- Form Factor: Portable
- Dimensions: Varies based on capacity (e.g., 3.79 x 1.95 x 0.36 inches for 500GB)
- Weight: Varies based on capacity (e.g., 1.44 ounces for 500GB)
- Operating Temperature: 0°C to 45°C
- Operating System Compatibility: Windows 10, Windows 8, Windows 7, and macOS High Sierra, Sierra, or Mac OS X El Capitan

Troubleshooting Questions and Answers:

1. Q: Why is my Sandisk Extreme SSD not recognized by my Windows 10 computer?
A: First, ensure that the SSD is properly connected to the computer via a compatible USB port. If the issue persists, try connecting it to a different USB port or with a different USB cable. Also, ensure you have the latest driver for the SSD installed by visiting the Sandisk website.

2. Q: Why is my Sandisk Extreme SSD not displaying the correct storage capacity?
A: This could be due to partitioning or formatting issues. Make sure to check the Disk Management tool in Windows 10 to ensure the full capacity of the SSD is recognized and assigned a valid drive letter. If the issue persists, you may need to reformat the drive using the appropriate file system that Windows 10 supports.

3. Q: Why is the performance of my Sandisk Extreme SSD slower than expected?
A: Firstly, verify that you are connecting the SSD to a USB 3.1 Gen 2 port, as using a lower version of USB or an incompatible port can limit the performance. Additionally, ensure that the SSD has adequate free space and is not almost full, as near-full drives tend to have slower speeds. If the issue persists, try updating the SSD firmware to the latest version available from the Sandisk

Thank you so much for sharing the link to the working Windows driver for the Sandisk Extreme SSD! It's a great resource for those of us who have been searching for a reliable driver.