Download Drivers

Hey everyone, I'm currently facing an issue with finding the driver for my Brother HL 1200 printer on Windows 10. I've searched extensively on the official Brother website, but unfortunately, I couldn't locate the specific driver for this model and operating system combination. I've also tried other driver download websites and forums without any luck. Could someone please provide a direct download link for the Brother HL 1200 printer driver that is compatible with Windows 10? I would greatly appreciate any assistance. Thanks in advance!

Below you can download impresora brother hl 1200 windows 10 driver for Windows.

File name: impresora-brother-hl1200_win10.exe
Version: 5.834
File size: 29799 MB
Upload source: original install disk
Antivirus software passed: Kaspersky ver. 1.58

Driver Impresora Brother Hl 1200 Windows 10

(click above to download)


Device Specification:
- Brand: Brother
- Model: HL 1200
- Compatible operating system: Windows 10
- Type: Printer
- Connectivity: USB
- Print technology: Laser
- Maximum print resolution: 2400 x 600 dpi
- Print speed: Up to 21 ppm
- Paper handling capacity: 150 sheets
- Monthly duty cycle: Up to 10,000 pages
- Dimensions: 14.2 x 14 x 7.2 inches
- Weight: 15.8 lbs
- Power consumption: 380 watts (printing), 0.9 watts (sleeping)

Troubleshooting Questions and Answers:
1. Q: Why is my Brother HL 1200 printer not printing?
A: There could be several reasons for this. First, ensure that the printer is powered on and connected to the computer properly via USB. Check if you have sufficient paper in the tray and there are no paper jams. Also, make sure the printer driver is installed correctly on your Windows 10 system.

2. Q: How can I resolve paper jams in my Brother HL 1200 printer?
A: If you encounter a paper jam, follow these steps to clear it:
- First, turn off the printer and unplug the power cord.
- Open the front cover and remove the drum and toner assembly.
- Gently pull out any jammed paper from the printer, taking care not to tear it.
- Check for any remaining scraps of paper and remove them if found.
- Reinstall the drum and toner assembly properly, ensuring it snaps into place.
- Close the front cover, plug in the power cord, and turn on the printer. It should be ready to print without any paper jam issue.

3. Q: My Brother HL 1200 printer is printing faded or poor-quality documents. What should I do?
A: If the printouts are faded or of poor quality, try the following troubleshooting steps:
- Verify that the toner cartridge is properly installed and has sufficient toner. Replace the toner cartridge if necessary.
- Check the print density settings in the printer driver. Adjust the settings to a higher density if the prints appear too light.
- Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and then back to the left several times.
- If the problem persists, it

I appreciate the effort the site admin has put into finding a working Windows driver for the Brother Hl 1200 printer, but it seems like the link provided is not working or expired. Can you please provide an updated link or suggest an alternative source? Thank you.