Below you can download sk hynix nvme windows 10 driver for Windows.
File name: sk-hynix-nvme_win10.exe
Version: 8.785
File size: 44105 MB
Upload source: original install disk
Antivirus software passed: Norton 4.94
Sk Hynix Nvme Driver Windows 10(click above to download)
Device Specification:
Model: Sk Hynix Nvme Driver
Operating System: Windows 10
- Interface: PCIe Gen3, NVMe 1.3
- Form Factor: M.2 2280
- Capacity Options: 256GB, 512GB, 1TB, 2TB
- Controller: SK Hynix
- NAND Flash: 3D TLC
- Sequential Read/Write Speeds: Up to 3,500/3,200 MB/s
- Random Read/Write IOPS: Up to 350,000/370,000
- Endurance: 150 TBW (Terabytes Written) for 256GB, 300 TBW for 512GB, 600 TBW for 1TB, 1,200 TBW for 2TB
- Power Consumption: Active - 4.5W, Idle - 40mW
- MTBF (Mean Time Between Failures): 1.5 million hours
- Warranty: 5 years
Troubleshooting Questions:
1. Question: Why is my Sk Hynix Nvme Driver not being recognized by the Windows 10 operating system?
Answer: There are a few potential reasons for this issue. Firstly, ensure that the device is properly connected to the motherboard's M.2 slot and properly detected in the BIOS or UEFI settings. If it is not detected, try reseating the drive firmly. Additionally, make sure you have the latest driver installed for the Sk Hynix Nvme drive. You can check the manufacturer's website for the most up-to-date driver version compatible with Windows 10.
2. Question: My Sk Hynix Nvme Driver's performance seems slower than expected. What can I do to improve its speed?
Answer: Several factors can influence the performance of the Sk Hynix Nvme Driver. Firstly, ensure that your motherboard's BIOS or UEFI settings are properly configured to support NVMe drives and that your PCIe slot is set to the correct generation (Gen3 in this case). Additionally, check if there are any firmware updates available for the drive and apply them if necessary. Lastly, ensure that you're using the appropriate drivers for the Sk Hynix Nvme Drive, as outdated or generic drivers may limit its performance.
3. Question: My Sk Hynix Nvme Driver is running hot during operation. How can I