Below you can download laserjet m1136 mfp 32 bit driver for Windows.
File name: laserjet-m1136-mfp32-bit.exe
Version: 7.840
File size: 34213 MB
Upload source: original install disk
Antivirus software passed: Eset v 4.44
Laserjet M1136 Mfp Driver Download 32 Bit(click above to download)
Device Specifications:
- Brand: HP
- Model: Laserjet M1136 Mfp
- Compatibility: 32-bit systems
- Type: Multifunction Printer
- Printing Technology: Laser
- Maximum Printing Resolution: Up to 600 x 600 dpi
- Maximum Printing Speed: Up to 18 ppm (pages per minute)
- Input Capacity: Up to 150 sheets
- Output Capacity: Up to 100 sheets
- Scan Resolution: Up to 1200 dpi
- Scan Speed: Up to 7 ppm
- Copy Speed: Up to 18 ppm
- Fax Capability: No
- Connectivity: USB 2.0
- Supported Operating Systems: Windows, Mac
Troubleshooting Questions and Answers:
1. Q: Why is my Laserjet M1136 Mfp not printing?
A: Firstly, ensure that the printer is powered on and connected properly to the computer. Check if there are any error messages or blinking lights on the device. It's also advisable to check the printer's toner levels and replace if necessary. Additionally, verify that the correct printer driver is installed on your computer and try reinstalling it if needed.
2. Q: The scanner of my Laserjet M1136 Mfp is not functioning. What should I do?
A: To troubleshoot scanning issues, make sure that the printer is connected to the computer correctly via USB. Ensure that the appropriate scanning software is installed on your computer and try restarting both the printer and computer. Additionally, check if the scanner glass is clean and free from any smudges or debris that may obstruct the scanning process.
3. Q: How can I resolve paper jam issues with my Laserjet M1136 Mfp?
A: Begin by turning off the printer and disconnecting the power cord. Open the printer's front cover and carefully remove any jammed paper using both hands. Make sure to pull it out in the direction of paper path to avoid tearing. Check for any remaining scraps of paper and remove them as well. Once cleared, close the front cover, reconnect the power cord, and turn on the printer.