Driver Request Hub - Download Drivers

Hi there! I've been searching high and low for the driver for my Kyocera Fs-6525Mfp printer, but I just can't seem to find it anywhere. I've tried visiting the Kyocera website and even checked their official support page, but no luck. I also looked on some popular driver download websites, but they don't seem to have it either. Could someone please provide me with a direct download link for the driver? I would really appreciate any help you can offer. Thanks in advance!

Below you can download kyocera fs-6525mfp driver for Windows.

File name: kyocera-fs-6525mfp.exe
Version: 4.541
File size: 20.80 MB
Upload source: original install disk
Antivirus software passed: AVG ver. 1.65

Download Driver Kyocera Fs-6525Mfp

(click above to download)


Device Specification:

Model: Kyocera FS-6525MFP
Type: Multi-function printer (MFP)
Printer Type: Laser
Print Resolution: 600 x 600 dpi
Print Speed: Up to 25 pages per minute
Supported Media Types: Plain paper, envelopes, labels, transparencies, cardstock
Supported Media Sizes: A4, A5, A6, B5, Letter, Legal
Paper Capacity: Standard 250-sheet universal cassette, 100-sheet multi-purpose tray
ADF Capacity: 50 sheets
Duplex Printing: Yes
Scanner Type: Color CIS
Scan Resolution: 600 x 600 dpi
Scan Speed: Up to 40 ipm (monochrome), up to 20 ipm (color)
Supported Interface: USB 2.0, Ethernet 10/100 Base-TX

Troubleshooting Questions and Answers:

Q1: Why is my Kyocera FS-6525MFP printer not printing?
A1: Please make sure that the printer is powered on and connected to the computer. Check if there are any error messages on the printer's display. Also, ensure that the printer has enough paper and toner/ink. If the issue persists, try reinstalling the printer driver or contact support.

Q2: My scanned documents appear blurry on the Kyocera FS-6525MFP. What should I do?
A2: Check the scan resolution settings on the printer's control panel or from the scanning software on the computer. Make sure the resolution is set to a higher value (e.g., 600 dpi) for better clarity. Clean the scanner glass and ensure there are no smudges or dust particles affecting the scan quality.

Q3: The Kyocera FS-6525MFP is displaying an error code "E33." How can I resolve this issue?
A3: Error code "E33" typically indicates a paper jam. Open all paper trays and inspect for any jammed paper. If found, gently remove it. Make sure the paper being used is suitable for the printer and properly loaded in the trays. Restart the printer and try printing again. If the error persists, refer to the user manual or contact Kyocera support for further assistance.

Thank you so much for providing the link to download the Kyocera Fs-6525Mfp driver for Windows, it worked perfectly and saved me a lot of time searching for it!