Below you can download zebra zm400 printer for windows 10 driver for Windows.
File name: zebra-zm400-printer-for_win10.exe
Version: 2.545
File size: 14.24 MB
Upload source: original install disk
Antivirus software passed: Avira 1.47
Zebra Zm400 Printer Driver For Windows 10(click above to download)
Forum Post:
Device Specification:
- Model: Zebra Zm400 Printer
- Compatibility: Windows 10
- Connectivity: USB, Ethernet, Parallel
- Print Technology: Thermal Transfer and Direct Thermal
- Print Speed: Up to 10 inches per second
- Resolution: 203 dpi (dots per inch)
- Maximum Print Width: 4.09 inches
- Media Types: Labels, Tags, Receipts, Wristbands
- Media Thickness: 0.003 inches to 0.010 inches
- Memory: 8 MB Flash, 16 MB DRAM
- Fonts: Standard Fonts (7 bitmapped, 1 smooth scalable), scalable fonts
- Display: LCD Control Panel with Backlit
- Dimensions: 10.9 inches (H) x 10.4 inches (W) x 18.7 inches (D)
- Weight: 32 lbs
Troubleshooting Questions and Answers:
1. Q: The printer is not responding or printing any labels. What should I do?
A: First, check the power connection and ensure the printer is turned on. Verify all cables are correctly connected. If the issue persists, try restarting the printer and the computer. Make sure you have selected the correct printer driver and it is up to date. Finally, check for any error messages on the printer's LCD control panel.
2. Q: The printed labels are smudged or faded. How can I fix this issue?
A: Start by checking the print head. Clean it using a lint-free cloth and recommended cleaning solution. Adjust the darkness or heat settings to ensure proper printing. Make sure you are using the correct type and size of media for your print job. If the issue continues, try calibrating the printer to ensure accurate label positioning.
3. Q: The labels are jamming frequently inside the printer. What steps can I take to resolve this problem?
A: Remove any stuck labels or debris from the printer's paper path. Open the printer and check if the label guides are properly aligned and not too tight against the labels. Ensure the labels are loaded correctly and not exceeding the maximum media thickness specified for the printer. If the issue persists, try adjusting the label tension settings or contacting customer support for further assistance.
Remember to consult the printer's user manual for detailed troubleshooting steps and refer to the manufacturer's website for any specific software or firmware updates related to your Zebra Zm400 Printer.