Below you can download zebra zd220d driver for Windows.
File name: zebra-zd220d.exe
Version: 2.402
File size: 33878 MB
Upload source: original install disk
Antivirus software passed: McAfee 1.33
Zebra Zd220D Driver Download(click above to download)
Device Specification:
- Device type: Zebra Zd220D Label Printer
- Connectivity: USB, optional Bluetooth
- Print resolution: 203 dpi
- Maximum print speed: 4 inches per second
- Maximum print width: 4.09 inches
- Print method: Direct thermal
- Media types supported: Roll-fed or fan-fold, die-cut or continuous direct thermal labels with or without black mark, tag stock, receipt paper, wristbands, and optional liner-free direct-thermal media
- Media thickness: 0.003 inches - 0.007 inches
- Label rolls supported: 5 inches outer diameter (OD) on a 1-inch core; 1 roll per printer
- Operating system compatibility: Windows, Linux, Mac OS
- Power source: External power supply with power cord
Troubleshooting Questions and Answers:
1. Q: My Zebra Zd220D printer is not responding when I send a print command. What should I do?
A: First, ensure that the printer is properly connected to the computer via the USB cable. If the connection is secure, try restarting both the printer and the computer. If the issue persists, reinstall the printer driver and make sure it is up to date.
2. Q: The labels I am printing on my Zebra Zd220D are coming out faded or with missing parts. How can I fix this?
A: This issue can be caused by low print head pressure. Open the printer and ensure that the print head latch is properly engaged and the print head is firmly in contact with the labels. Additionally, check if the print head is clean and free from debris. If necessary, adjust the print head pressure or clean the print head using a soft cloth.
3. Q: My Zebra Zd220D is displaying a paper out error even though there is paper loaded. How can I resolve this issue?
A: Firstly, make sure that the paper roll is properly loaded and aligned. Check if the paper sensors inside the printer are clean and not obstructed. Clean them gently if required. If the error persists, recalibrate the media sensors by following the instructions provided in the printer's manual or user guide.