Download Drivers

Hello everyone,

I have been searching for a driver for my USB to Serial RS232 adapter without any luck. I have tried browsing the manufacturer's website, but they only provide software updates for their newer models. I have also checked various driver download websites, but the results were either outdated or unreliable. Could someone please provide me with a reliable link to download the driver for this specific adapter? Any help would be greatly appreciated. Thank you in advance!

Below you can download usb to serial rs232 adapter driver for Windows.

File name: usb-to-serial-rs232-adapter.exe
Version: 2.537
File size: 44243 MB
Upload source: manufactuter website
Antivirus software passed: AVG ver 2.14

Download Driver Usb To Serial Rs232 Adapter

(click above to download)


Device Specification:

- Type: USB to Serial RS232 Adapter
- Compatibility: Windows and Mac OS
- Interface: USB 2.0
- Connector: RS232 Serial Port
- Transfer Rate: Up to 1 Mbps
- Length: 3 feet (approx. 0.9 meters)
- Supports: RS232 Serial Interface devices (e.g., modems, card readers, barcode scanners, etc.)
- Plug and Play: Yes
- Driver Installation: Required (download available)

Troubleshooting Questions and Answers:

1. Q: My USB to Serial RS232 Adapter is not recognized by my computer. What should I do?
A: Please make sure you have downloaded and installed the proper driver from the manufacturer's website. Restart your computer after installation and reconnect the adapter securely to the USB port.

2. Q: I am not getting any communication between my computer and the RS232 Serial device connected through the adapter. What could be the issue?
A: Firstly, ensure that the serial device is compatible with the RS232 protocol and is powered on. Check the connection between the adapter and the device, ensuring that both ends are securely plugged in. If the issue persists, try using a different USB port on your computer or test the adapter with another device to rule out any hardware problems.

3. Q: The transfer rate of my USB to Serial RS232 Adapter is slower than expected. How can I improve the data transfer speed?
A: Firstly, verify whether the serial device supports higher transfer rates. If it does, check the settings of the software or application you are using to communicate with the device and make sure the appropriate baud rate is configured. Additionally, try using a different USB port on your computer to ensure optimal performance.

Thank you for sharing the link to the working Windows driver for the USB to Serial RS232 adapter, it's greatly appreciated!