Download Drivers

I have been trying to find the Windows 10 driver for my Nadamoo barcode scanner but haven't had any luck so far. I have visited the official Nadamoo website and their support section, but couldn't find any driver downloads specifically for Windows 10. I've also tried searching on various driver websites and forums, but still couldn't come across a reliable source. Can someone please provide me with a direct download link to the Nadamoo Barcode Scanner driver for Windows 10? Your assistance would be greatly appreciated.

Below you can download nadamoo barcode scanner windows 10 driver for Windows.

File name: nadamoo-barcode-scanner_win10.exe
Version: 8.923
File size: 17.81 MB
Upload source: original install disk
Antivirus software passed: Kaspersky version 3.21

Nadamoo Barcode Scanner Driver Windows 10

(click above to download)


Forum post:

Device Specification:

- Model: Nadamoo Barcode Scanner
- Compatibility: Windows 10
- Input: USB connection
- Scanning technology: Laser
- Resolution: 0.1mm (4mil)
- Scan angle: 72°
- Scanning speed: 200 scans per second
- Decode capability: UPC/EAN, Code128, Code39, Code11, Interleaved 2 of 5, Codabar, MSI Plessey, GS1 DataBar, etc.
- Operating temperature: 0°C to 45°C (32°F to 113°F)
- Storage temperature: -40°C to 60°C (-40°F to 140°F)
- Dimensions: 150mm x 95mm x 65mm
- Weight: 180g
- Cable length: 1.8m
- Shock resistance: 1.5m drops
- RoHS and FCC certified

Troubleshooting Questions and Answers:

1. Q: Why is the Nadamoo Barcode Scanner not scanning any barcodes?
A: If the scanner is not scanning barcodes, please ensure that the laser beam is properly aligned with the barcode and the barcode is within the specified scan angle of 72°. Additionally, check if the scanner is connected securely to the computer via the USB cable.

2. Q: Why is the Nadamoo Barcode Scanner not recognized by Windows 10?
A: If the scanner is not being recognized by Windows 10, try the following troubleshooting steps:
- Make sure the USB cable is connected properly at both ends.
- Check the Device Manager for any unrecognized or disabled devices and try updating their drivers.
- Test the scanner with a different USB port or on a different computer to isolate any potential hardware or software issues.

3. Q: How can I improve the scanning speed of the Nadamoo Barcode Scanner?
A: To enhance the scanning speed, consider the following:
- Ensure that the barcode being scanned is clean and not damaged.
- Optimize the scanning distance by maintaining an ideal distance between the scanner and barcode (around 10-30cm).
- Adjust the scanner's settings to prioritize speed over decoding capability, if available.
- Check for any software updates or firmware upgrades provided by Nadamoo to improve performance and compatibility.

Thank you so much for sharing the link to the working Windows driver for the Nadamoo Barcode Scanner! I'm grateful for your help.