Below you can download lan card d-link dfe-530tx rev-c1 driver for Windows.
File name: lan-card-d-link-dfe-530tx-rev-c1.exe
Version: 1.259
File size: 20699 MB
Upload source: search engine
Antivirus software passed: G Data version 2.52
Download Driver Lan Card D-Link Dfe-530Tx Rev-C1(click above to download)
Device Specification:
- Device Name: D-Link DFE-530TX Rev-C1
- Device Type: LAN card
- Supported Standards: IEEE 802.3, Ethernet, Fast Ethernet
- Connection Type: Wired
- Interface: PCI
- Max Data Transfer Rate: 100 Mbps
- Connector Type: RJ-45
Troubleshooting questions and answers:
Q1: Why is my D-Link DFE-530TX LAN card's LED not lighting up?
A1: Ensure that the LAN card is properly installed in the PCI slot. Check the connections between the LAN card and the router/switch. If the issue persists, try a different PCI slot or contact technical support.
Q2: Why am I unable to establish an internet connection with my D-Link DFE-530TX LAN card?
A2: Verify that the LAN cable is securely connected to both the LAN card and the router/switch. Ensure the driver for the LAN card is installed correctly. Check for any IP configuration issues on your system. If problems persist, consider updating the LAN card driver or seeking further assistance.
Q3: Why am I experiencing slow network speeds with my D-Link DFE-530TX LAN card?
A3: Check if other devices on the network are facing similar slowdowns, as it could be an issue with the overall network capacity. Verify that all cables are in good condition, as damaged cables can affect performance. Additionally, check if there are any resource-intensive processes or applications running on your computer. If the issue continues, try updating the driver or contact D-Link support for further guidance.