Below you can download usb to rs232 driver for Windows.
File name: usb-to-rs232.exe
Version: 5.612
File size: 17.58 MB
Upload source: manufactuter website
Antivirus software passed: AVG v. 3.70
Download Driver Usb To Rs232(click above to download)
Device Specification:
- Type: USB to RS232 Converter
- Compatibility: Supports Windows, Mac, and Linux operating systems
- Interface: USB type-A male connector to RS232 DB9 male serial connector
- Data Rate: Supports baud rates up to 115200bps
- Chipset: FTDI FT232R
- Operating Voltage: 5V DC
- Cable Length: 1.5 meters (5 feet)
- Drivers: Plug and play, no additional drivers required for Windows, Mac, and Linux (driver download may be necessary for some older versions of Windows)
Troubleshooting Questions and Answers:
Q1: My USB to RS232 converter is not working. What could be the problem?
A1: Please ensure that the latest drivers for the device have been installed. If using Windows, try connecting the converter to a different USB port. Additionally, check if the RS232 device you are connecting to is functioning properly.
Q2: The USB to RS232 converter is not being recognized by my computer. What should I do?
A2: First, make sure that the USB cable is securely connected to both the converter and the computer. Try connecting the converter to another computer or USB port to rule out any issues with the computer or port. If the problem persists, try reinstalling the drivers or obtaining the latest driver from the manufacturer's website.
Q3: I am experiencing errors while transferring data through the USB to RS232 converter. How can I troubleshoot this?
A3: Check if the baud rate and other settings of the RS232 device match the settings in the software or application you are using. Verify that the serial cable and connections are secure, and there are no loose pins or bent connectors. If possible, test the converter with a different RS232 device or software to isolate the issue.