Below you can download for hp deskjet 2131 driver for Windows.
File name: for-hp-deskjet2131.exe
Version: 1.241
File size: 14.14 MB
Upload source: manufactuter website
Antivirus software passed: Norton v. 5.10
Driver Download For Hp Deskjet 2131(click above to download)
Specification of the HP Deskjet 2131:
- Printer type: Inkjet
- Functions: Print, scan, copy
- Print speed: Up to 7.5 ppm (black), Up to 5.5 ppm (color)
- Print resolution: Up to 4800 x 1200 dpi (color), Up to 1200 x 1200 dpi (black)
- First page out time: As fast as 15 seconds (black), As fast as 18 seconds (color)
- Scanner type: Flatbed
- Scan resolution: Up to 1200 dpi (optical)
- Copy speed: Up to 5 cpm (black), Up to 3 cpm (color)
- Paper handling: 60-sheet input tray, 25-sheet output tray
- Connectivity: USB 2.0
- Supported operating systems: Windows, Mac
Troubleshooting Questions and Answers:
1. Q: The printer is not printing properly, what should I do?
A: First, check if the ink cartridges are installed correctly and have enough ink. If needed, replace them. Also, make sure the print heads are clean. Run a print head cleaning utility to resolve any clogged nozzles. Finally, ensure that the print settings are properly configured and try printing a test page.
2. Q: The scanner is not working, what could be the issue?
A: Start by checking the physical connection between the printer and the computer. Ensure that the USB cable is securely connected at both ends. If the connection is fine, try restarting both the printer and the computer. If the problem persists, reinstall the printer drivers and scanner software. You can download the latest drivers from the official HP website.
3. Q: The copy function is not functioning, how can I fix it?
A: Verify that the paper is loaded correctly in the input tray and that it is not jammed. If it is jammed, carefully remove the stuck paper. Check if the printer display shows any error message related to copying. If so, follow the instructions provided to resolve the issue. Additionally, ensure that the printer firmware is up to date and try resetting the printer to its default settings.