Usbasp Driver Windows 10 Download
Usbasp Driver Windows 10 Download
Hi everyone, I'm having trouble finding the driver link for the USBasp driver compatible with Windows 10. I've been searching all over the internet for a reliable source but couldn't land on one. I checked the official website of USBasp and various driver download websites, but they only provide drivers for older versions of Windows. Could someone please share a trustworthy source or provide a direct download link for the required driver? I appreciate any help you can offer. Thanks in advance!
-
Detective
- Site Admin
Re: Usbasp Driver Windows 10 Download
Below you can download usbasp windows 10 driver for Windows.
File name: usbasp_win10.exe
Version: 9.470
File size: 24685 MB
Upload source: original install disk
Antivirus software passed: Eset v. 4.88
Usbasp Driver Windows 10 Download
(click above to download)
Device Specification:
- Name: USBASP
- Type: USB programmer
- Compatibility: Windows, Linux, Mac
- Input: USB connection
- Output: Programmed microcontroller
- Supported Microcontrollers: Arduino, AVR, ATmega, ATtiny, etc.
- Programming Speed: Up to 5KB/s
- Voltage: 5V (USB powered)
- Features: Supports ISP and PDI programming modes, Onboard ZIF socket, LED indicators, Reset button
Troubleshooting Questions and Answers:
Q1: The USBASP driver is not installing correctly on Windows 10, what should I do?
A1: Make sure you have downloaded the correct version of the USBASP driver that is compatible with Windows 10. Disable any antivirus or security software temporarily and try installing the driver again. If the issue persists, try plugging the USBASP into a different USB port on your computer.
Q2: After connecting the USBASP to my microcontroller, I am unable to program it. What could be the problem?
A2: Verify the connections between the USBASP and your microcontroller. Check if the target board's power supply is stable and connected properly. Ensure that you have selected the correct microcontroller type and programming mode in your programming software. Try pressing the reset button on the USBASP just before initiating the programming process.
Q3: The LED indicators on my USBASP are not lighting up, and my computer is not recognizing the device. How do I troubleshoot this issue?
A3: Firstly, ensure that the USB cable is securely connected to both the USBASP and your computer. Try using a different USB cable and check if the issue persists. If the problem continues, try plugging the USBASP into a different USB port on your computer. If none of these steps work, there might be an issue with the USBASP hardware, and it may require repair or replacement.
File name: usbasp_win10.exe
Version: 9.470
File size: 24685 MB
Upload source: original install disk
Antivirus software passed: Eset v. 4.88
Usbasp Driver Windows 10 Download
(click above to download)
Device Specification:
- Name: USBASP
- Type: USB programmer
- Compatibility: Windows, Linux, Mac
- Input: USB connection
- Output: Programmed microcontroller
- Supported Microcontrollers: Arduino, AVR, ATmega, ATtiny, etc.
- Programming Speed: Up to 5KB/s
- Voltage: 5V (USB powered)
- Features: Supports ISP and PDI programming modes, Onboard ZIF socket, LED indicators, Reset button
Troubleshooting Questions and Answers:
Q1: The USBASP driver is not installing correctly on Windows 10, what should I do?
A1: Make sure you have downloaded the correct version of the USBASP driver that is compatible with Windows 10. Disable any antivirus or security software temporarily and try installing the driver again. If the issue persists, try plugging the USBASP into a different USB port on your computer.
Q2: After connecting the USBASP to my microcontroller, I am unable to program it. What could be the problem?
A2: Verify the connections between the USBASP and your microcontroller. Check if the target board's power supply is stable and connected properly. Ensure that you have selected the correct microcontroller type and programming mode in your programming software. Try pressing the reset button on the USBASP just before initiating the programming process.
Q3: The LED indicators on my USBASP are not lighting up, and my computer is not recognizing the device. How do I troubleshoot this issue?
A3: Firstly, ensure that the USB cable is securely connected to both the USBASP and your computer. Try using a different USB cable and check if the issue persists. If the problem continues, try plugging the USBASP into a different USB port on your computer. If none of these steps work, there might be an issue with the USBASP hardware, and it may require repair or replacement.
Re: Re: Usbasp Driver Windows 10 Download
Thank you so much for sharing this working Windows driver link for the Usbasp device, it resolved my issue and I can now use it on my Windows 10 system without any problems!