Below you can download konica minolta bizhub 164 driver for Windows.
File name: konica-minolta-bizhub164.exe
Version: 4.189
File size: 20.39 MB
Upload source: manufactuter website
Antivirus software passed: Norton version 5.51
Download Driver Konica Minolta Bizhub 164(click above to download)
Device Specification:
- Device Type: Multifunction Printer
- Brand: Konica Minolta
- Model: Bizhub 164
- Functions: Print, Copy, Scan
- Printing Technology: Laser
- Maximum Print Resolution: 600 x 600 dpi
- Print Speed: Up to 16 pages per minute
- Copy Speed: Up to 16 pages per minute
- Maximum Copy Resolution: 600 x 600 dpi
- Scanning Resolution: Up to 600 x 600 dpi
- Paper Handling: Standard 250-sheet input tray, 100-sheet output tray
- Supported Paper Sizes: A4, A5, B5, Legal, Letter, Executive
- Connectivity: USB 2.0
- Operating Systems: Windows and Mac compatible
- Dimensions: 518 x 429 x 489 mm (WxDxH)
- Weight: 21 kg
Troubleshooting Questions and Answers:
1. Q: The printer is not responding when I try to print. What could be the issue?
A: Ensure that the printer is properly connected to the computer via the USB cable. Check if the printer is turned on and no error alerts are displayed on the device. Try restarting the computer and printer to re-establish the connection.
2. Q: The output prints are faded or faint. How can I resolve this?
A: Check the toner levels and replace the toner cartridge if it is low or empty. Verify the print settings to ensure that the print density is not set too low. Clean the printer's optical components, such as the printhead and scanner glass, to remove any dust or debris that may be affecting print quality.
3. Q: I am unable to scan documents from the printer to my computer. What should I do?
A: Make sure the printer is connected to the computer correctly and powered on. Check the scanner settings on your computer to ensure it is properly configured for the Konica Minolta Bizhub 164. Install or update the necessary scanner drivers on your computer if required. If the issue persists, try restarting both the printer and computer, then attempt scanning again.
Please note that these troubleshooting answers are general suggestions and may not address all specific issues. For comprehensive troubleshooting, it is recommended to refer to the device's user manual or contact Konica Minolta customer support.