Below you can download zebra zp450 windows 10 driver for Windows.
File name: zebra-zp450_win10.exe
Version: 2.637
File size: 22951 MB
Upload source: original install disk
Antivirus software passed: McAfee version 3.60
Download Zebra Zp450 Windows 10 Driver(click above to download)
Specification of Zebra Zp450 Device:
- Type: Label Printer
- Connectivity: USB, Serial, and Ethernet
- Print Method: Direct Thermal
- Print Resolution: 203 dpi (8 dots/mm)
- Print Speed: Up to 5 inches per second
- Print Width: Up to 4.09 inches
- Media Types: Thermal labels, tags, and receipt paper
- Compatibility: Windows 10, Windows 7, and other major operating systems
- Dimensions: 7.5 x 7.6 x 10 inches
- Weight: 4.6 lbs
Troubleshooting Questions and Answers:
1. Q: Why is my Zebra Zp450 not printing?
A: Please ensure that the printer is connected properly to the computer and powered on. Check if you have selected the correct printer in the print settings. Also, verify that the printer has enough label or receipt paper and that it is loaded correctly. Inspect the printer for any error lights or messages, and consult the user manual or Zebra's support website for troubleshooting steps specific to the observed issue.
2. Q: How do I calibrate the print alignment on my Zebra Zp450?
A: To calibrate the print alignment, power on the printer and wait for the status indicator lights to stop blinking. Open the printer driver properties on your computer, navigate to the "Tools" or "Options" tab, and locate the "Calibrate" or "Media Calibration" option. Follow the on-screen instructions to initiate the calibration process. Ensure that the labels or receipt paper are loaded correctly during calibration for accurate alignment.
3. Q: My Zebra Zp450 is not recognized by my computer. What should I do?
A: First, try connecting the printer to a different USB port on your computer. If the issue persists, check if the USB cable is intact and properly connected on both ends. You can also try using a different USB cable. If using a network connection, ensure that the printer's IP address is correctly configured and that it is on the same network subnet as your computer. If the problem still persists, consult the printer's user manual or Zebra's support website for advanced troubleshooting steps or contact their technical support for assistance.