Below you can download zebra p100i windows 10 driver for Windows.
File name: zebra-p100i_win10.exe
Version: 7.493
File size: 15.40 MB
Upload source: manufactuter website
Antivirus software passed: Panda ver. 2.95
Zebra P100I Driver Windows 10(click above to download)
Device Specification:
- Manufacturer: Zebra
- Model: P100I
- Operating System: Windows 10
- Connectivity: USB
- Printing Method: Direct-to-Card
- Print Speed: 18 seconds per card (monochrome), 35 seconds per card (color)
- Print Resolution: 300 dpi (11.8 dots/mm)
- Card Thickness: 10-40 mil
- Card Capacity: 50 cards (input hopper), 20 cards (output stacker)
- Dimensions: 7.9 inches (W) x 13.2 inches (H) x 8.7 inches (D)
- Weight: 13.2 lbs
Troubleshooting Questions and Answers:
1. Q: Why is the Zebra P100I not printing any cards?
A: Ensure that the printer is properly connected to the computer via the USB cable. Check if the correct printer driver is installed and set as the default printer in the Windows 10 settings. Verify that there are enough printable cards in the input hopper.
2. Q: The printed cards from the Zebra P100I have streaks and smudges. How can I fix this issue?
A: First, clean the printer's print-head, using the recommended cleaning kit provided by the manufacturer. Additionally, make sure that you are using high-quality and compatible card stock. Adjust the print density settings in the printer driver to optimize the print quality.
3. Q: The Zebra P100I is displaying an "Out of Cards" error message even though there are cards available in the input hopper. How do I resolve this?
A: Check if the cards are inserted properly into the input hopper and not stuck or misaligned. Ensure that the card thickness is within the supported range of 10-40 mil. Restart the printer and try reloading the cards. If the issue persists, contact Zebra technical support for further assistance.