Below you can download qlogic qle2562 driver for Windows.
File name: qlogic-qle2562.exe
Version: 3.814
File size: 16742 MB
Upload source: original install disk
Antivirus software passed: Kaspersky ver. 2.66
Qlogic Qle2562 Driver Download(click above to download)
Device Specification:
- Brand: Qlogic
- Model: Qle2562
- Interface: Dual-Port 8 Gb Fibre Channel
- Form Factor: Low Profile PCIe Adapter
- Data Transfer Rate: Up to 8 Gbps
- Connectivity: Dual-port
- Supported OS: Windows, Linux, VMware
- Ports: 2 x LC
- Power Consumption: Max 11.1W
- Dimensions: 6.89 x 2.71 inches
- Weight: 0.4 lbs
- Warranty: Manufacturer's limited warranty
Troubleshooting Questions and Answers:
1. Q: Why is my Qlogic Qle2562 not being detected by the operating system?
A: Please ensure that the device drivers are properly installed and up-to-date. Additionally, check the system's BIOS settings to enable the PCIe slot if necessary.
2. Q: I'm experiencing inconsistent or slow data transfer rates with my Qle2562. What could be the issue?
A: There could be several factors contributing to this problem. Firstly, check the Fibre Channel cables for any damage or loose connections. Ensure that the device drivers are updated and compatible with your operating system. Also, verify the compatibility and configuration of the switches or infrastructure in use.
3. Q: The Qle2562 adapter is consuming a lot of power. Is there any way to optimize power consumption?
A: Yes, there are a few power optimization techniques you can employ. Ensure that the device firmware is up-to-date as newer versions often include power-saving features. Consider adjusting power management settings in the operating system. Moreover, if link speeds greater than 4 Gbps are not required, lower link speeds may reduce power consumption.