Download Drivers

Hi everyone,

I'm currently looking for the driver for the Insignia USB to Serial adapter. I have been searching for it on numerous websites, including the official Insignia website, but unfortunately, I haven't been able to find a working download link. I have also tried searching on driver update services and forums, but no luck there either.

Could someone please help me out by providing a direct link to download the Insignia USB to Serial driver? I would greatly appreciate it. Thank you in advance for any assistance you can offer!

Below you can download insignia usb to serial driver for Windows.

File name: insignia-usb-to-serial.exe
Version: 2.350
File size: 17.93 MB
Upload source: original install disk
Antivirus software passed: Panda v. 4.21

Insignia Usb To Serial Driver Download

(click above to download)


Device Specification:

- Brand: Insignia
- Model: USB to Serial Converter
- Supported operating systems: Windows, macOS, Linux
- Connector type: USB Type-A male to RS-232 male
- Serial interface: RS-232 (DB9)
- Plug and Play: Yes
- Maximum baud rate: 115200 bps
- Driver software: Required, available for download from the Insignia website
- Dimensions: Approx. 2.5 inches (length) x 0.75 inches (width) x 0.5 inches (height)
- Cable length: Approximately 3 feet (varies based on the model)
- Compatibility: Compatible with various devices such as modems, routers, GPS devices, barcode scanners, and more.

Troubleshooting Questions and Answers:

Q1: The USB to Serial Converter is not working properly on my Windows computer. What could be the issue?
A1: Firstly, ensure that you have installed the correct driver for your specific operating system by downloading it from the official Insignia website. If the issue persists, try using a different USB port on your computer. Additionally, check if your serial device is functioning correctly and if the cables are securely connected.

Q2: I'm unable to establish a connection with my device using the USB to Serial Converter on my Mac. What should I do?
A2: Start by confirming that the necessary driver/software is installed on your Mac. Visit the official Insignia website and download the appropriate driver for your macOS version. If the problem persists, try using a different USB cable or testing the device on a different Mac to determine if it's an issue with the converter or your specific Mac.

Q3: My Linux computer doesn't recognize the USB to Serial Converter. How can I fix this?
A3: Linux systems often have built-in drivers for USB to serial converters. However, double-check that the appropriate kernel module is loaded by running the 'lsmod' command in the terminal. If not, try loading the module manually using the 'modprobe' command. Additionally, ensure that the device is properly connected and that the cables are not damaged.

Thank you so much for sharing the link to the working Windows driver for the Insignia USB to Serial device! I really appreciate your help.