Below you can download zebra zm400 windows 7 64 bit driver for Windows.
File name: zebra-zm400_win764-bit.exe
Version: 9.827
File size: 16.88 MB
Upload source: other website
Antivirus software passed: McAfee ver. 4.85
Download Driver Zebra Zm400 Windows 7 64 Bit(click above to download)
Device Specification:
- Model: Zebra Zm400
- Compatibility: Windows 7 (64-bit)
- Connectivity: Wired/USB
- Printing Method: Direct thermal/thermal transfer
- Print Resolution: 203 dpi (8 dots/mm)
- Maximum Print Speed: 10 inches (254 mm) per second
- Maximum Print Width: 4.09 inches (104 mm)
- Memory: 4 MB Flash, 8 MB SDRAM
- Additional Features: Panel-open detection, 32-bit architecture, adjustable transmissive and reflective media sensors, etc.
Troubleshooting Questions and Answers:
Question 1: Why is my Zebra Zm400 not printing?
Answer: There could be several reasons for this issue. Please ensure that the printer is powered on and connected properly to your computer. Also, make sure that the printer has sufficient media and the printhead is aligned correctly. Check if the printer is displaying any error messages or if the ink ribbon needs replacement. If the problem persists, try updating the printer driver or contacting the support team for further assistance.
Question 2: How can I resolve paper jam issues with my Zebra Zm400?
Answer: To resolve paper jam problems, first, power off the printer and disconnect it from the power source. Open the printer's panels and carefully remove any stuck paper by pulling it in the direction of the paper path. Ensure there are no torn bits left inside. Gently clean the paper path and rollers using a lint-free cloth. Once cleaned, close all panels securely and reconnect the printer to the power source. Power it on and try printing again.
Question 3: What should I do if my Zebra Zm400 displays an offline status?
Answer: If your Zebra Zm400 printer is showing an offline status, try the following troubleshooting steps:
1. Check the printer's connection to the computer or network. Ensure cables are securely plugged in and not damaged.
2. Restart both the printer and the computer to re-establish the connection.
3. Confirm that the printer is selected as the default printer in your computer's settings.
4. Verify the printer's power supply and ensure it is turned on.
5. If using a network connection, check if the printer's IP address is configured correctly and if it is connected to the same network as your computer.
If the issue persists, consult the printer's user manual or contact the manufacturer's support for further assistance.