Below you can download printer hp p1006 driver for Windows.
File name: printer-hp-p1006.exe
Version: 8.411
File size: 44267 MB
Upload source: original install disk
Antivirus software passed: Panda version 1.22
Download Driver Printer Hp P1006(click above to download)
Specifications of the device:
- Device: Hp P1006 Printer
- Type: Laser monochrome printer
- Printing speed: Up to 17 ppm (pages per minute)
- Printing resolution: 600 x 600 dpi (dots per inch)
- Paper capacity: Up to 150 sheets
- Connectivity: USB 2.0
- Compatible operating systems: Windows (XP and later), Mac OS X (v10.4 and later)
- Dimensions: 14.4 x 9.1 x 7.6 inches
- Weight: 10.3 pounds
Troubleshooting questions and answers:
1. Question: Why is my Hp P1006 Printer not printing?
Answer: There could be several reasons for this issue. Firstly, ensure that the printer is properly connected to the power source and turned on. Check if there are any error messages displayed on the printer's control panel. Additionally, verify that the printer is correctly connected to the computer via the USB cable. If the problem persists, try restarting both the printer and the computer.
2. Question: How can I resolve paper jams in my Hp P1006 Printer?
Answer: If you encounter a paper jam, follow these steps to clear it: Firstly, turn off the printer and disconnect the power cable. Open the printer's front cover and carefully remove any jammed paper or debris. Check the paper tray for any misaligned sheets. Once cleared, close the front cover of the printer and reconnect the power cable. Turn on the printer and try printing again.
3. Question: My Hp P1006 Printer prints faded or blurry documents. What could be the cause?
Answer: Faded or blurry prints can be caused by a few factors. Firstly, make sure that the toner cartridge is not empty or low on toner. Replace it if necessary. Additionally, ensure that the printing paper you are using is suitable for laser printers and is not wet, curled, or wrinkled. Adjust the printing resolution settings to a higher quality if needed. If the issue persists, clean the printer's print head using the recommended procedures outlined in the user manual.