Below you can download epson lx 300 ii windows 10 32 bit driver for Windows.
File name: epson-lx300-ii_win1032-bit.exe
Version: 8.521
File size: 29830 MB
Upload source: other website
Antivirus software passed: Kaspersky ver 4.79
Download Driver Epson Lx 300 Ii Windows 10 32 Bit(click above to download)
Device Specification:
- Device: Epson LX-300+II
- Compatibility: Windows 10 32-bit
- Model: LX-300+II
- Manufacturer: Epson
- Printer Type: Impact Dot Matrix
- Print Method: Impact dot matrix technology
- Print Speed: 337 characters per second (at 12 characters per inch)
- Print Resolution: 240 x 144 dpi
- Maximum Print Width: 80 characters
- Connectivity: Parallel (IEEE-1284) and USB 2.0
- Paper Handling: Single sheet and continuous paper, multiple copies supported
- Power Consumption: Approx. 23W (operating), Approx. 1.5W (standby)
- Dimensions (W x D x H): 366 mm x 275 mm x 159 mm
- Weight: Approx. 4.4 kg
Troubleshooting Q&A:
1. Question: Why does the printer fail to print any text or characters?
Answer: Ensure that the correct driver for Epson LX-300+II is installed and properly configured. Verify that the printer is turned on and connected to the computer securely. Check if there is enough paper loaded into the paper feed mechanism.
2. Question: Why is the print quality poor or faded?
Answer: Firstly, make sure the printer ribbon is correctly installed and not worn out. Clean the print head using the provided cleaning mechanism or by following the manufacturer's instructions. Adjust the print density settings for better print quality if necessary.
3. Question: Why does the printer produce unexpected horizontal lines on the printed documents?
Answer: This issue might occur due to the misalignment of the print head. Perform a print head alignment using the printer's software or through the control panel settings. If the problem persists, check if the paper being used is compatible and correctly loaded into the printer.