Wd Black Nvme Driver Windows 10

[Cliff1988]

I recently installed a WD Black NVMe SSD on my Windows 10 computer and I'm in need of the corresponding driver. I have searched extensively on the official Western Digital website, as well as on popular driver update platforms, but I could not find the driver I need. Could someone please provide me with a reliable download link for the WD Black NVMe driver for Windows 10? I would greatly appreciate any assistance. Thank you!

[Detective]

Below you can download wd black nvme windows 10 driver for Windows.

File name: wd-black-nvme_win10.exe
Version: 7.650
File size: 44489 MB
Upload source: other website
Antivirus software passed: Eset v 2.62

Wd Black Nvme Driver Windows 10

(click above to download)


Forum Post:

Device Specification:

Model: WD Black NVMe Driver
Operating System Compatibility: Windows 10
Interface: NVMe PCIe Gen3 x4
Capacity Options: 250GB, 500GB, 1TB, 2TB, 4TB
Form Factor: M.2 2280
Sequential Read/Write Speeds: Up to 3,470MB/s / Up to 3,000MB/s
Random Read/Write Speeds: Up to 500K IOPS / Up to 400K IOPS
Endurance: Varies based on capacity
MTTF (Mean Time to Failure): 1.75 million hours
Warranty: 5 years

Troubleshooting Questions and Answers:

1. Why is my WD Black NVMe drive not recognized in Windows 10?
Answer: Please ensure that the drive is properly connected to the M.2 slot and correctly seated. Also, check if the drive is visible in the BIOS/UEFI settings. If not, try updating the motherboard's firmware or checking for any driver updates from the manufacturer's website.

2. How can I improve the performance of my WD Black NVMe drive on Windows 10?
Answer: Firstly, ensure that you have installed the latest driver provided by Western Digital for optimal performance. Secondly, check that the NVMe drive is using the PCIe Gen3 x4 interface and not operating at a lower speed. Additionally, make sure that TRIM is enabled for the drive, and consider updating your motherboard's firmware for any fixes or enhancements related to NVMe drives.

3. What should I do if my WD Black NVMe drive becomes unresponsive or fails to boot?
Answer: In such cases, it is recommended to perform a power cycle by shutting down your computer, disconnecting the power cable, pressing and holding the power button for 15 seconds, and then reconnecting the power cable and turning on the system. If the issue persists, try booting into the BIOS/UEFI settings and checking if the drive is recognized. If not, you may need to contact Western Digital support for further assistance or consider seeking professional help for data recovery, depending on the severity of the issue.

Remember to consult the official Western Digital website or user manual for more detailed troubleshooting steps specific to your device.

[Cliff1988]

Thank you so much for sharing the link to the working Windows driver for the WD Black NVMe device, it's greatly appreciated!