Below you can download xprinter xp-a160h driver for Windows.
File name: xprinter-xp-a160h.exe
Version: 9.455
File size: 29312 MB
Upload source: original install disk
Antivirus software passed: McAfee ver. 2.11
Download Driver Xprinter Xp-A160H(click above to download)
Product: Xprinter XP-A160H Thermal Receipt Printer
Specification:
- Printing Method: Direct Thermal
- Print Speed: 160mm/s
- Resolution: 203dpi
- Paper Width: 80mm
- Paper Thickness: 0.06 - 0.08mm
- Print Width: 72mm
- Interface: USB, Serial, Ethernet
- Cutter: Auto-Cutter
- Power Supply: DC 24V/2.5A
Troubleshooting Questions and Answers:
Q: Why is the printer not printing anything?
A: First, check if the printer is powered on and the cables are securely connected. Ensure that the printer is properly installed on your computer and has the correct driver installed. Also, make sure that the paper roll is properly loaded and hasn't run out. If the issue persists, try restarting the printer and the computer.
Q: The printer is printing faded or barely visible receipts. What should I do?
A: This issue can be caused by low print density settings. Check the printer settings and adjust the print density to a higher level. Make sure the paper roll is properly aligned and not damaged. If the problem persists, try cleaning the print head using a soft, lint-free cloth and isopropyl alcohol, following the manufacturer's instructions.
Q: The auto-cutter of my XP-A160H is not working. How can I fix it?
A: First, ensure that the cutter is not jammed by any paper debris or obstructions. Disconnect the power supply and gently remove any stuck paper. Then, check the cutter blade if it's damaged or worn out, and replace if necessary. Verify if the auto-cut option is enabled in the printer settings. If the issue persists, contact the Xprinter support for further assistance or to arrange a repair or replacement.